IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.

重要：请注意，映像文件必须以 ISO 磁盘映像文件的方式刻录到 CD/DVD 中去（不能刻录为单个的数据挖掘）。要获取更多的关于如何刻录 ISO 文件的信息，请参考您的 CD/DVD 刻录软件的说明书。如果您还没有刻录 ISO 镜像文件的光盘刻录软件，请点下面链接下载这样的免费刻录软件。

The Rescue Disk image has been created and stored in this file:%hsNow you need to burn the Rescue Disk image to a CD or DVD.IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.

应急盘 ISO 镜像文件已经创建并存储为文件： %hs现在您需要把应急盘刻录到 CD 或 DVD。重要：文件必须以 ISO 镜像文件方式刻录到 CD/DVD（不要刻录为单个的数据文件）。要获取更多的关于如何刻录 ISO 文件的信息，请参考您的 CD/DVD 刻录软件的说明书。请您在刻录应急盘之后，选择 '系统' > '验证应急盘' 来验证应急盘是否已经成功刻录。

I. How to Boot TrueCrypt Rescue DiskTo boot a TrueCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. Note: In the TrueCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.

I. 如何启动 TrueCrypt 应急盘要使用 TrueCrypt 应急盘，把应急盘插入光驱并重启计算机。如果 TrueCrypt 应急盘屏幕并没有出现（或者如果您在启动管理器屏幕的 'Keyboard Controls' 部份没有看到 'Repair Options' 项目），很可能您的 BIOS 设置了硬盘优先于光驱启动。如果是这种情况，重启计算机，当你一看到 BIOS 启动屏幕的时候按下 F2 或 DEL 按键，直到 BISO 设置界面出现。如果 BIOS 设置界面没有出现，再次重启计算机，在你按下重启键的时候就按住 F2 或 DEL 按键。当 BIOS 设置界面出现时，配置您的 BIOS 优先从光驱启动（相关信息可以参考您的主板说明书或者资讯您的计算机供应商寻求技术协助）。之后重启计算机。TrueCrypt 启动管理器应该就会从应急盘中启动了。提示：在TrueCrypt 启动管理器屏幕，您可以按下键盘的 F8 按键选择修复选项（Repair Options）。

There are three main reasons why such countermeasures have been implemented:- It enables the creation of a secure platform for mounting of hidden TrueCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.- It prevents data corruption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. TrueCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.

采取这样的限制措施有三种主要原因：- 可以为加载隐藏加密卷提供更安全的平台。因此我们官方推荐仅在隐形操作系统运行的情况下加载隐藏加密卷。（更多信息请参考文档的 'Security Precautions Pertaining to Hidden Volumes' 部份）- 在某些情况下，有可能确定在某一时间，某一特定的文件系统（或者文件系统中特定的文件并未保存或访问）并未在特定的操作系统的实例中加载（例如，通过分析和比较文件系统日志、时间戳记、应用程序日志、错误日志等等）。这可能暗示计算机上安装了隐形操作系统（译者注：恢复备份的系统、或者重新安装系统也会造成这种迹象，作者考虑的因素并不全面）。而这里的限制措施则可以避免此类情况发生。- 能够防止数据损坏和保证安全的使用系统休眠功能，这里假设所有载入的文件系统在系统休眠的时候均为同一状态。TrueCrypt 通过对任何迷惑系统和隐形系统里面可以访问的系统执行写保护来保证这点。如果没有这样的保护，当在一个系统中载入一个文件系统，而在另外系统中这个文件系统却为休眠是，文件系统可能会损坏。

- If the previous steps do not help or if the TrueCrypt Boot Loader screen does not appear (before Windows starts), insert the TrueCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the TrueCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. In the TrueCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).

- 如果前面步骤无效或者 TrueCrypt 启动管理器屏幕并没有出现（在 Windows 启动前），请在光驱中插入 TrueCrypt 应急盘并重启计算机。如果 TrueCrypt 启动管理器屏幕没有出现 或者如果您在启动管理器屏幕的 'Keyboard Controls' 部份没有看到 'Repair Options' 项目，很可能您的 BIOS 设置了硬盘优先于光驱启动。如果是这种情况，重启计算机，当你一看到 BIOS 启动屏幕的时候按下 F2 或 DEL 按键，直到 BISO 设置界面出现。如果 BIOS 设置界面没有出现，再次重启计算机，在你按下重启键的时候就按住 F2 或 DEL 按键。当 BIOS 设置界面出现时，配置您的 BIOS 优先从光驱启动（相关信息可以参考您的主板说明书或者资讯您的计算机供应商寻求技术协助）。之后重启计算机。TrueCrypt 启动管理器应该就会从应急盘中启动了。在TrueCrypt 启动管理器屏幕，按下键盘的 F8 按键选择修复选项（Repair Options）。在修复选项 'Repair Options' 菜单，选择 'Restore TrueCrypt Boot Loader'（恢复启动管理器）。之后从光驱中取出应急盘并重启计算机。之后 Windows 应当会启动（此时尚未加密系统）。