From professional translators, enterprises, web pages and freely available translation repositories.
Add a translation
stopping distance
bestuurders-remweg
Last Update: 2014-11-14 Usage Frequency: 5 Quality: Reference: IATE
safe stopping distance
minimale remafstand
Last Update: 2014-11-13 Usage Frequency: 3 Quality: Reference: IATE
the stopping distance;
de remafstand;
Last Update: 2014-11-21 Usage Frequency: 2 Quality: Reference: IATE
vehicle stopping distance
vertragingsweg
the stopping distance is:
de remweg moet aan de volgende eisen voldoen:
Last Update: 2017-03-14 Usage Frequency: 2 Quality: Reference: Translated.com
s = stopping distance in m
s = remafstand in m
Last Update: 2014-11-21 Usage Frequency: 2 Quality: Reference: Translated.com
s stopping distance, in metres
s remafstand in meter
stopping distance during test (mm)
remafstand tijdens de test (mm)
Last Update: 2014-11-21 Usage Frequency: 4 Quality: Reference: Translated.com
the total stopping distance is then:
de totale stopweg is dan:
Last Update: 2014-11-17 Usage Frequency: 1 Quality: Reference: Translated.com
stopping distance of the safety device
vangweg
(δ = f(v, te, stopping distance).
(δ = f(v, te, remweg)).
Last Update: 2014-11-21 Usage Frequency: 1 Quality: Reference: IATE
the deceleration is evaluated from the stopping distance.
de afremming wordt beoordeeld aan de hand van de remweg.
stopping distances:
remwegen:
stopping distance during test (mm) maximum intrusion
remafstand tijdens de test (mm) maximale binnendringing
s1 = the stopping distance achieved in the type-0 test,
s1 = de bij de proef van het type 0 gemeten remafstand
determination of corrected stopping distance compared to standard conditions
bepaling van de gecorrigeerde stopweg in vergelijking met de standaardomstandigheden
during calibration, the stopping distance should be 650 ± 30 mm
tijdens de kalibrering moet de remafstand 650 ± 30 mm bedragen.
determination of the corrected stopping distance compared with standard conditions
s2 = the stopping distance as recorded in the residual performance test,
s2 = de bij de beproeving van de restwerking gemeten remafstand
stopping distance in relation to the water (point a to d):
stopweg ten opzichte van het water: (punt a tot d)