You searched for: transfer [ Turn off colors ]
From professional translators, enterprises, web pages and freely available translation repositories.
Penanganan transfer data via Bluetooth
Handy data transferring via Bluetooth
Last Update: 2011-03-17
Untuk menggunakan Pemuat Peta, Nokia Multimedia Transfer harus telah terinstal.
To use Map Loader you need Nokia Multimedia Transfer installed.
Last Update: 2011-02-24
Untuk menggunakan Pemuat Peta, Nokia Multimedia Transfer harus telah terinstal.Download dan instal Pemuat Peta ke komputer yang kompatibel. Untuk menggunakan Pemuat Peta, Nokia Multimedia Transfer harus telah terinstal.
To use Map Loader you need Nokia Multimedia Transfer installed.Download and install Map Loader to your compatible computer. To use Map Loader you need Nokia Multimedia Transfer installed.
Last Update: 2011-03-17
Labisia pumila (Myrinaceae), is a subherbaceous plant with creeping stems and found mainly in the lowland and hill forests of Peninsular Malaysia at an altitude between 300 and 700 m (Burkill 1966). Decoction of L. pumila has been traditionally used by generations of Malay women to induce and facilitate childbirth, as well as being a post-partum medication to help contract the birth channel, to tone the abdominal muscles, maintain a healthy female reproductive system, to treat menstrual irregularities and to regain body strength (Burkill 1966; Wan Ezumi et al. 2007). The ability to enhance the contraction of the uterus has been proven (Cheong 2007). Increasing request for high yielding material of this plant from the herbal industry serve as catalyst for researchers to establish high quality planting materials to fulfill the industrial demand.
Therefore, in order to produce high quality raw materials to support Malaysian herbal industries, it is important to select genotype which either produced the maximum bioactivity and/or contained high quality active ingredients (Ibrahim et al. 1990) before it can be domesticated. FRIM has established a germplasm of 300 genotypes for both varieties L. pumila var. pumila and L. pumila var. alata (Farah Fazwa et al., 2010, 2012) with high total phenolic content which is more related to antioxidant activities. In order to produce high quality planting materials with traditional claim of L. pumila, a study will be conducted on the ability of the species to enhance contraction of the uterus. Furthermore, literature and patent search indicated that production of high yielding accessions based on uterus contraction activity has not been investigated and registered cultivar of L. pumila is unavailable.
In this study, aqueous extraction is one of the methods will be use for the extraction of the fresh leaves of the herbs. This method offers several advantages over conventional solvent extraction-less initial capital investments, safer operation, capability of discontinuous operation, and production of a variety of products. Another advantage of aqueous processing is the capability for utilization of certain chemicals to remove or inactivate undesirable substances (Carl M. Cater, 1974). A study showed that water extracts of L.pumila were able to displace estradiol binding to antibodies raised against estradiol, making it similar to other estrogens such as estrone and estradiol. The extract has also been found to produce a dose-response effect on the reproductive hormones of female rats, notably on the estradiol and free testosterone level.
For the planting part, the planting stocks are usually raised from seeds. The dependence on seeds as source of planting materials is inadequate as seeds are difficult to obtain due to depletion of mother plants. Propagation by seeds alone will not be able to meet the large number of planting stock required. Propagation technique by cuttings can be one of the alternative methods used (Hartman & Kester 1983). This method of propagation also offers useful tool for propagating the superior genotypes which will help to maximise quality and productivity. Rozihawati (2008) has reported the propagation techniques by cuttings, factors affecting rooting and nursery techniques of this species. Aminah et al. (2009) also reported the suitability of using cutting to propagate L. pumila using different leaf parts and areas. Research on propagating superior accessions of L. pumila based on total phenolic content has also been carried out (Farah Fazwa et al. 2013).
As a conclusion, this study will be carried out to to select high yielding accessions of L. pumila from established germplasm based on uterus contraction activity for breeding purposes; to propagate the selected high yielding accessions using vegetative techniques and to establish clonal bank from the selected high yielding accessions of L. pumila. It is expected that at the end of the study high yielding planting materials of L. pumila will be made available and transfer of technology conducted. These outputs are important to ensure sustainable supply of high yielding planting materials for the production of high quality materials to meet future industry demand.
1.1 Problem Statement
Phytochemical extraction is important for the selection of high yielding accessions of Labisia pumila. Literature and patent search indicate the selection of high yielding accessions based on uterus contraction activity have never been tested before.
1.2 Objective (s);
I. To select high yielding accessions of L. pumila from established germplasm based on uterus contraction activity for breeding purposes.
II. To propagate the selected high yielding accessions by vegetative techniques.
III. To establish clonal bank from the selected high yielding accession of L. pumila
2.0 LITERATURE REVIEW
Labisia pumila, commonly known as Kacip Fatimah in Malaysia, is a small herbaceous and slightly woody plant (Karimi et al., 2011). The habitat of this plant is in lowland primary forests at shady places or in secondary forests on humus-rich soils (Sunarno, 2005). There are three varieties of Kacip Fatimah had been recognized namely var. alata, var. pumila and var. lanceolata and each variety have its own use and function (Stone, 1988). Stone (1988) also identified that these varieties can be distinguished from each other by their petiole and leaf characteristic.
Traditionally, Labisia pumila have been widely used as medicinal plant especially related to women health care. It is locally known to be used for induce and facilitate childbirth as well as a post partum medication to help contract the birth channel, to tone the abdominal muscles and to regain body strength by traditional uses (Wan Ezumi et al., 2007). Other traditional uses include treatment for dysentery, flatulence, rheumatism, dysmenorrheal and gonorrhea (Mohamad Norhaiza et al., 2009; Burkil, 1996). Recently, it was reported that the bioactive compounds of L. pumila consisted mainly resorcinols, flavonoids and phenolic acids (Ibrahim, 2010). Polyphenolic contain in L. pumila have the ability to prevent cancer and heart disease (Tsao & Deng, 2004).
The main objective of this study is to select the high yielding of Labisia pumila based on contraction activity. The uterine contractility activity was carried out using procedure by Ayinde et.al. Estrus in the uterus of female Sprague Dawley rats will be induced using diethylstilbestrol (i.p.). The effects of L. pumila on the uterus contraction activity will be measured using Powerlab system (ADIntruments Pty. Ltd.) and compared to oxytocin as the positive control drug. The high yielding accessions of L. pumila will be selected based on of the highest contraction activity.
The selected L.pumila will undergo propagation using vegetative techniques to ensure sustainable supply of high quality planting material which benefit the producer as well as the consumer.
Objective 1: To select high yielding accessions of L. pumila from established germplasm based on uterus contraction activity for breeding purposes.
a) Phytochemical Extraction and Chemical fingerprinting of L. pumila aqueous extract
Plant leaf will be cleaned and leave to dry in at oven at controlled temperature until reached desired moisture content. 300 g dried and ground leaf will be extracted by refluxing using hot distilled water. The filtrate is then concentrated and dried using freeze-dryer. The crude obtained will be divided into two analysis, bioactivity and chemical fingerprint analysis (UV, HPLC and HPTLC). While, the FTIR fingerprint will be carried out on the dried and ground leaves. PCA analysis also will be carried out.
b) Uterus contraction activity of L. pumila
The uterine contractility activity will be carried out using procedure by Ayinde et al. 2006. Estrus in the uterus of female Sprague Dawley rats will be induced using diethylstilbestrol (i.p.). The effects of L. pumila on the uterus contraction activity will be measured using Powerlab system (ADIntruments Pty. Ltd.) and compared to oxytocin as the positive control drug. The high yielding accessions of L. pumila will be selected based on of the highest contraction activity. This bioactivity facility will be established in FRIM.
Objective 2: To propagate the selected high yielding accessions by vegetative techniques.
a) Multiplication of high yielding accession by vegetative technique
Multiplication of high yielding accessions of L. pumila will be done by cuttings. This method will be used to produce the high yielding materials of L. pumila. From each of selected accessions, 60 ramets will be further produced. These clones will be raised and maintained at FRIM’s nursery for six to eight months before they can be transplanted to field. The survival rate and growth performance (e.g height, leaf number, biomass) of these rooted plants will also be monitored and assessed during this stage
Objective 3: To establish clonal bank from the selected high yielding accession of L. pumila
a) Establishment of clonal bank plot
The clonal bank plot will be laid out in a Completely Randomized Block Design (RCBD). These selected clones will be arranged per replicate in three experimental blocks. For each replicate, the size of planting bed will be 1 meter x 2 meter. This experimental design will be applied to both varieties.
Upon completion of this project:
1. Phytochemical Extraction and Chemical fingerprinting of L. pumila aqueous extract and also test for uterus contraction activity of L. pumila on rats
2. Multiplication of high yielding accession by vegetative technique
3. Establishment of clonal bank plot from the selected high yielding accession of L.pumila
Last Update: 2014-07-22
THE COMPANIES ACT 1965
PRIVATE COMPANY LIMITED BY SHARES
ARTICLES OF ASSOCIATION
PELABUHAN HUTAN MELINTANG HOLDING SDN. BHD.
1. Subjects as hereinafter provided, the regulations in Table ‘A’ in Fourth Schedule of the Companies Act 1965 (‘the Act’ ) shall apply to the company with the exception of Regulation 22, 48, 71 and 90 of Table A.
2. The Company is a Private Company, and accordingly :
a) The right to transfer shares is restricted in the manner hereinafter prescribed;
b) The number of members of the Company ( counting joint holders of shares as one person and not counting any person in the employment of the Company or of its subsidiary was and thereafter has continued to be a member of the Company ) shall be limited to fifty; provided that where two or more persons hold one or more shares in the Company jointly they shall for the purposes of this paragraph be treated as single member;
c) Any invitation to the public to subscribe for any shares in or debentures of the Company is prohibited; and;
d) Any invitation to the public to deposit money with the Company for fixed periods or payable at call, whether bearing or not bearing interests, is prohibited.
3. The directors may, in their absolute discretion and without assigning any reason therefore, decline to register any transfer of any share, whether or not it is fully paid shares.
4. If within half an hour from the time appointed for the meeting a quorum is not present, the meeting, if convened upon the requisition of members, shall be dissolved; in any case it shall stand adjourned to the same day in the next week at the same time and place, or to such other day and at such other time and place the directors may determine; and if at the adjourned meeting of quorum is not present within half an hour from the time appointed therefore, those present shall constitute a quorum.
5. The first directors shall be ZAHARI BIN SHADAN, RAZALI BIN ESA and AHMAD FIZAL BIN AZRAT GULL. The number of directors shall not less than two and not more than nine.
6. A resolution in writing, signed by majority of the Directors for the time being entitled to receive notice of a meeting of the Directors, shall be as valid and effectual is if it had been passed at a meeting of the Directors duly convened and held. Any such resolution may consist of several documents in like form each signed by one or more Directors.
7. The first secretary shall be DR. RUZIAH BINTI GHAZALI (LS 05611)
8. The office of the Secretary shall be vacated if he signed by notice in writing to the Company, left at the registered office and copies lodged with the directors for the time being at their last known addresses.
We, the several persons whose names and addresses are subscribed hereunder being subscribers, hereby agree to the foregoing Articles of Association.
Last Update: 2014-06-10
I hope this my mail will reach you in good
condition of health,l am really happy for
your reply, I will really like to have a good
relationship with you, and I have a special
reason why I decided to contact you
because of the urgency of my situation
here and I am miss. Amber 25 years girl,
Democratic Republic du Côte d'Ivoire , i
am the only daughter of LATE
The deputy minister of national security
before his death , he was also chairman
managing director ( OF DIAMONDS
COMPANY LTD ABIDJAN ) in the capital
of my country
, and it also exports diamonds, coffee,
cobalt copper, water, My father was killed
along side with my beloved mother by
some hoodlums,who parades themselves
as political thugs they accuse my father of
coup attempt ( which he never did ) In this
last elections between President Laurent
Gbagbo and his Dr.Alassane Ouattara
election contested presidential ,
I am constrained to contact you because
of the maltreatment I, am receiving from
my step mother. She planned to take
away all my late father's treasury and
properties from me since the unexpected
death of my beloved Father.
Meanwhile I wanted to escape but my
step mother hide away my international
passport and other valuable traveling
documents. Luckily she did not discover
where I kept my Father's File which
contains important documents. So I
decided to run to the refugee camp where
I am presently seeking asylum under the
United Nations High Commission for the
Refugee here in Dakar , Republic of
I wish to contact you personally for a long
term business relationship and investment
assistance in your country.
My father of blessed memory deposited
the sum of ($5.400.000.00 U.S.D ) Five
point Four million Dollars ) in Finance
Firm with my name as the next of kin.
However, I shall forward you with the
necessary information of the deposit on
confirmation of your acceptance to assist
me for the transfer and investment of the
fund in your country. As you will help me
in an investment,
and I will like to complete my
Last Update: 2014-05-20
Owner: Chicago Park District, Chicago
Architect: Adrian Smith Gordon Gill Architecture LLP, Chicago
Structural Engineer: Thornton Tomasetti, Inc., Chicago
General Contractor: Carbon Day Automotive, Chicago
Photographer: Steinkamp Photography
The Solar Canopy is an 11-foot-tall prototype structure consisting of 6,000 pounds of architecturally exposed structural steel (AESS). It is designed to harvest solar energy for use in powering electric/hybrid vehicles. Conceived by Carbon Day Automotive to promote sustainability initiatives in Chicago, the structure was unveiled in a temporary location in Douglas Park as one of the focal points of the International Olympic Committees visit to the city during the selection process for the site of the 2016 Olympics.
Owned by the Chicago Park District, the canopy found its permanent home on Northerly Island near the city’s museum campus and has been actively charging electric vehicles. With a construction cost of $67,000, the structure employs a cost-efficient, aesthetically pleasing and sustainable design that was achieved through integrated structural solutions, streamlined fabrication, and simplified coordination.
The canopy seamlessly blends into the background of any park and artistically complements neighboring buildings. The elegant design includes a tree-like steel superstructure that can support up to 900 pounds of solar equipment, a 300-sf canopy featuring photovoltaic panels, and a subterranean concrete foundation anchoring the structure to the ground. The prototype design is adaptable to integrate a range of photovoltaic technologies at varying orientations, providing sustainable solutions to any location around the world. The team aimed to create a flexible design that could accommodate a single structure or multiple structures linked back-to-back, creating a shaded corridor for users in the interstitial space. In large-scale applications of the solar canopy, parking lots can be converted into giant plug-in charging stations, with the possibility of surplus energy being donated to the power grid. Bolstering its sustainable appeal, the structure has the potential to collect, store, filter and reuse rainwater to irrigate adjacent agricultural or park lands.
All of the canopy’s components and connections provided a cost-efficient structural design without compromising the architectural aesthetics. To achieve this solution, the smallest diameter pipes possible were bent with compound curves. The slender pipes were visually preferred both for a graceful appearance and to limit encroachment on parking spaces. 3D CAD and 3D analysis were used to design the complex curves that give this structure its tree-like form. Since an integrated conduit is required to transfer energy from the photovoltaic panels to an underground battery pack, small access holes were provided at the top and bottom of the pipes to conceal the electrical wiring as well as to drain water.
Bolted connections were minimized in favor of welds to achieve the architectural design intent. Because of the increased use of welds, the canopy’s structural engineer sought to decrease field work by performing as much of the fabrication in the steel shop as possible. This process helped to reduce costs and allowed for better quality control of the end product.
The canopy was shop fabricated as seven pieces that were limited in size to fit on a standard truck bed, streamlining shipping. Once on site, the base was set and the columns erected. The roof structure was delivered as two pieces and connected on the ground. The solar array was then installed and the roof lifted into position and set on the bolted seat connections found at the tops of the columns. The connections were designed so that the roof structure concealed the bolts from view.
Located on Chicago’s lakefront, the canopy’s design accommodates the wind and snow loads of the city’s infamous weather, while providing an imaginative addition to the landscape. Creating the appearance of sprouting from the ground, the canopy is anchored to a concrete foundation located 1’ 4” below grade. The base connection and foundation were designed to resist a significant permanent overturning moment created by the unbalanced sprouting columns that asymmetrically cantilever from the base. To diminish deterioration of the structure, the concealed foundation allows for the heaviest of parking lot wearing surfaces, and hot-dipped galvanized steel prevents corrosion to the components exposed to the elements.
Extensive collaboration was necessary among a team consisting of nine firms to realize the unique architectural design of the canopy, while still achieving a cost-sensitive, functional structure. With only three face-to-face meetings, the majority of communication was accomplished electronically. Team members shared ideas and designs effectively through virtual communication methods, creating an efficient design process. From concept to working prototype, the solar canopy design was completed in 25 days.
As a prototype structure, the canopy is not only versatile with its ability to integrate multiple applications at a variety of sites, but it is also unique in its striking yet simplistic appearance. Whether it is used to fuel electric cars, bikes, or scooters, the canopy is a distinct addition to any landscape.
Last Update: 2014-04-15
Search human translated sentences
Help rating similar searches: terinstal.download (Malay - English) | characteristic (Malay - English) | diethylstilbestrol (Malay - English) | architecturally (Malay - English) | electronically (Malay - English)
Users are now asking for help: i have stocks at home (English>Tagalog) | pagninilay (Tagalog>English) | enxofre (Portuguese>English) | plan de incadrare in zona (Romanian>English) | траци (Serbian>Chinese (Simplified)) | sianse (English>Tagalog) | sie benutzendauert (German>Greek) | instructoras (Spanish>English) | risposto (Italian>Latin) | balsemgom (Afrikaans>English) | donkey (English>Latin) | blessed thistle (English>Telugu) | pob lwc (Welsh>English) | مشتهياتهم (Arabic>French) | negundo (English>Tamil)