Results for carbide translation from English to Chinese (Simplified)

carbide
碳化物

calcium carbide
碳化钙

9. silicon carbide;
9. 碳化硅；

10. titanium carbide; or
10. 钛碳化物；

select the cemented carbide saw blades.
选用硬质合金带锯条。

6.c.6. silicon-carbide materials
6.c.6. 碳化硅材料

radomes 6.c.6. silicon-carbide materials
6.c.6. 碳化硅材料

method based on the chemical process of carbide production
以碳化物生产的化学方法为基础的办法

(b) amounts due for calcium carbide exported to iraq
(b) 与出口到伊拉克的电石有关的款项

6.c.6. silicon-carbide materials as follows:
6.c.6. 碳化硅材料如下：

the panel recommends no compensation for amounts due for calcium carbide exported to iraq.
427. 小组建议不赔偿与出口到伊拉克的电石有关的款项。

can be used for processing complex molds and parts of carbon steel, alloy steel and cemented carbide.
可用于对各种碳钢、合金钢和硬质合金等金属材料形状较为复杂的模具及零件加工。

2.b.4. carbide production: in the cell for nox emissions the shading has been removed.
79. 2.b.4. 碳化物生产：nox排放量单元格去除了的灰色阴影。

a twoday workshop on mercury reduction in carbide pvc production is planned to be held in beijing from 4-5 june 2009.
计划于2009年6月4 - 5日在北京举行一次为期两天的关于在碳化聚氯乙烯的生产中减少汞排放的研讨会。

an investigative report on carbide pvc production currently being prepared by the ministry of environmental protection of china will be made available for the workshop.
中国环境保护部正在编制一份关于碳化聚氯乙烯生产的调查报告，将在研讨会举行前提供。

as a final result of this project the ministry of environmental protection of china will prepare a carbide pvc analysis, to be completed in late 2009.
作为该项目的最终成果，中国环境保护部将编制一份碳化聚氯乙烯分析报告，报告将于2009年下半年完成。

fusas seeks compensation in the amount of usd 46,013 for 1,525 barrels of calcium carbide, which it exported to iraq on 15 august 1989.
406. fusas要求赔偿1989年8月15日出口到伊拉克的1,525桶电石款46,013 美元。

for example, zhuzhou cemented carbide works import and export company is recorded as having imported 40 tons of untagged coltan from the democratic republic of the congo in december 2010.
例如，有记录表明，株洲硬质合金(zhuzhou cement carbides)2010年12月从刚果民主共和国进口了40吨没有标示的钶钽铁矿石。

the acetylene-based vcm production process typically uses coal and limestone as raw materials to produce calcium carbide, which is then mixed with water to make acetylene.
乙炔法生产氯乙烯单体通常先用煤和石灰石作为原料生产碳化钙，碳化钙再与水混合制造乙炔。

selected line speed of saw blade is 20 to 40 m / min;the equipment mode is first to second block; select the cemented carbide saw blades.
锯条线速度选用20～40米/分，设备模式1～2挡，皂化油冷却，选用硬质合金带锯条。