Results for supported raid levels translation from English to Chinese (Simplified)

supported raid levels
支持的 raid 级别

intel® desktop board d865perl - supported raid levels
英特尔® 台式机主板 d865perl - 支持的 raid 级别

what raid levels are supported?
支持哪些 raid 级别？

intel® desktop boards support the following raid levels:
英特尔® 台式机主板支持下列 raid 级别：

raid level
raid 级别

a raid 10 array uses four hard drives to create a combination of raid levels 0 and 1 by forming a raid 0 array from two raid 1 arrays.
raid 10 阵列用四个硬盘通过从 2 个 raid 1 阵列形成一个 raid 0 阵列来创建 raid 0 和 raid 1 组合。

the following describes what occurs for each raid level:
下文描述每个 raid 级别中发生了什么：

1.5gb/s) connectors, serial ata raid 0 & 1 (see what raid levels are supported® for raid implementation details.)
1.5gb/s) 连接器，串行 ata raid 0 和 raid 1 （有关 raid 实施方案的详细信息，请参阅支持哪些 raid 级别。）

two serial ata connectors (sata150 1.5gb/s) supporting serial ata raid 0 & 1 (see what raid levels are supported? for raid implementation details)
1.5gb/s) 连接器，支持串行 ata raid 0 和 raid 1 （有关 raid 实施方案的详细信息，请参阅支持哪些 raid 级别）

no redundancy information is stored in a raid 0 volume. this means that if one hard drive fails, all data on both drives is lost. this lack of redundancy is also reflected by the raid level 0, which indicates no redundancy. raid 0 is not recommended for use in servers or other environments where data redundancy is a primary goal.
在 raid 0 卷中不会存储冗余信息。这意味着一个硬盘出现故障，两个硬盘上的所有数据都会丢失。此冗余的缺陷性也在 raid 0 级上得到反映，它表明没有冗余。因此不建议在服务器或其它将数据冗余作为基本目标的环境中使用 raid 0。