From professional translators, enterprises, web pages and freely available translation repositories.
a human safe power density of 1 mw/cm2 distributed across a 10 km diameter area corresponds to 750 megawatts total power level.
a human safe power density of 1 mw/cm2 distributed across a 10 km diameter area corresponds to 750 megawatts total power level.
for example, the 1978 nasa study of solar power satellites required a 1-km diameter transmitting antenna and a 10 km diameter receiving rectenna for a microwave beam at 2.45 ghz.
for example, the 1978 nasa study of solar power satellites required a 1-km diameter transmitting antenna and a 10 km diameter receiving rectenna for a microwave beam at 2.45 ghz.
basic dimensions: mm diameter, _________________150 mm height, __________________50 l capacity, _____________0, 6 kg mass, __________________ 0, 25
basic dimensions: mm diameter, _________________150 mm height, __________________50 l capacity, _____________0, 6 kg mass, __________________ 0, 25
quizá lo menos brillante resulte la percusión, si bien alcanza un alto grado de elaboración en "motion diameter", donde su conjunción con los bajos es prácticamente perfecta.
perhaps the less brilliant point is percussion, even though it reaches a high degree of ellaboration in "motion diameter", where its conjunction with the bass is practically perfect.
local or regional lymph nodes are usually removed if the lesion is more than 1 cm in diameter, due to a high risk that they will contain cancer cells (micrometastasis) that could develop into a new tumor or spread further.
local or regional lymph nodes are usually removed if the lesion is more than 1 cm in diameter, due to a high risk that they will contain cancer cells (micrometastasis) that could develop into a new tumor or spread further.
except for nozzles located on the underside of a tank bottom that rests directly on the tank grade29 and nozzles with reinforcements that are too narrow to permit compliance with the following provisions, single-thickness reinforcing plates and saddle flanges or integral reinforcing pads on manholes or nozzles attached to the outside of a tank shall be provided with at least one telltale hole with a maximum actual diameter of 3/8 in. that shall be tapped for a preliminary compressed-air and solution-film test for soundness of attachment welds around the manhole or nozzle and its reinforcement both inside and outside the tank. these telltale holes shall be left open when the tank is in service. the surface of the reinforcing plate, saddle flange, or pad adjacent to the tank wall shall be relieved slightly by grinding to be reasonably certain that the test pressure will extend entirely around the nozzle even though the reinforcement may be drawn tightly against the tank wall by the welding.620
6except for nozzles located on the underside of a tank bottom that rests directly on the tank grade29 and nozzles with reinforcements that are too narrow to permit compliance with the following provisions, single-thickness reinforcing plates and saddle flanges or integral reinforcing pads on manholes or nozzles attached to the outside of a tank shall be provided with at least one telltale hole with a maximum actual diameter of 3/8 in. that shall be tapped for a preliminary compressed-air and solution-film test for soundness of attachment welds around the manhole or nozzle and its reinforcement both inside and outside the tank. these telltale holes shall be left open when the tank is in service. the surface of the reinforcing plate, saddle flange, or pad adjacent to the tank wall shall be relieved slightly by grinding to be reasonably certain that the test pressure will extend entirely around the nozzle even though the reinforcement may be drawn tightly against the tank wall by the welding.20