Vous avez cherché: bio (Chinois (simplifié) - Anglais)

equatorial bio-fuel
equatorial bio-fuel

低粘性 (bio-psa 410x)
low tack (bio-psa 410x)

复制未经更改的原始 .bio 文件至软盘。
copy the original unaltered .bio file to a floppy diskette.

要点： .bio 文件和 .itk 文件必须位于同一目录中。
important: both the .bio file and the .itk file must be together in the same directory.

该方法适用于恢复文件（*.bio）太大，无法存入一张软盘中或台式机主板不支持软驱时。
use this method if the recovery file (*.bio) is too large to fit on a floppy disk or if the desktop board does not include floppy drive support.

2. 将恢复文件（*.bio）复制到一张格式化过的软盘中。
2. copy the recovery file (*.bio) to a formatted floppy disk.

创建包含有未经更改的原始 .bio 文件和 iflash.exe 的启动软盘。
create a bootable disk containing the original unaltered .bio file and iflash.exe.

2. 将恢复文件（*.bio）复制到一张 cd 中。
2. copy the recovery file (*.bio) to a cd.

双击 sw.exe 以解压其它文件，其中包括 .bio 和 .itk 文件。
double-click sw.exe to extract additional files, including the .bio and .itk files.

4. 将 iflash.exe 和 .bio 文件复制到可启动 usb 设备。
4. copy iflash.exe and the .bio file to the bootable usb device.

当在系统集成商工具包中打开一个新的工作区时，.bio 文件与 .itk 文件必须位于同一目录下，否则 flex 模块组件将不会显示为一个选件。
both the .bio file and the .itk file must be together in the same directory when opening a new workspace in the integrator toolkit or else the flex modules component will not appear as a choice.

文本 unep/bio. div/n7-inc.5/4.31 ilm 822
text: unep/bio.div/n7-inc.5/4, 31 ilm 822

（注： 根据用于 d875pbz 的 .bio 文件大小，命令行实用程序 iflash2.exe 可用于单个磁盘上的两个文件）
(note: due to the size of the .bio file for d875pbz, the command line utility iflash2.exe can be used to fit both files on a single disk)

此栏目显示的是每个进程的 io 状态， 它提供以下的信息。 读取字符数此任务从存储介质上读取到的字符数， 这个数据是相应进程流经过 read () 和 pread () 系统调用的所有字节数的简单相加和， 其中也包括终端 io 和其它不涉及真实磁盘读写的内容( 如页面缓存字节) 。 写入字符数此任务向存储介质上已写入的字符数， 数据来源和读取字符数类似。 读取调用数执行读取 i/ o 操作系统调用数量， 例如 read () 和 pread () 。 写入调用数执行写入 i/ o 操作的系统调用数量， 例如 write () 和 pwrite () 。 实际读取字节数此进程实际从存储介质获取到的字节数量， 由 submit_ bio () 一级的系统调用完成。 对于使用块设备存储的文件系统而言， 这是一个精确的参考值， 但对于 nfs 和 cifs 等网络文件系统而言可能意义不大。 实际写入字节数由此进程发送给存储介质的字符数统计， 其数据是根据脏内存页处理时间得来。 括号内的数字显示的是各统计值的更新比率， 它是由两次数据变化之间的差异除以更新时间间隔得来的。 技术信息： 此数据来源于 / proc / * / io， 更详细的说明文档请参见内核树中 documentation/ accounting 和 documentation/ filesystems/ proc. txt 。
this column shows the io statistics for each process. the tooltip provides the following information: characters readthe number of bytes which this task has caused to be read from storage. this is simply the sum of bytes which this process passed to read() and pread(). it includes things like tty io and it is unaffected by whether or not actual physical disk io was required (the read might have been satisfied from pagecache). characters writtenthe number of bytes which this task has caused, or shall cause to be written to disk. similar caveats apply here as with characters read. read syscallsthe number of read i/ o operations, i. e. syscalls like read() and pread(). write syscallsthe number of write i/ o operations, i. e. syscalls like write() and pwrite(). actual bytes readthe number of bytes which this process really did cause to be fetched from the storage layer. done at the submit_bio() level, so it is accurate for block-backed filesystems. this may not give sensible values for nfs and cifs filesystems. actual bytes writtenattempt to count the number of bytes which this process caused to be sent to the storage layer. this is done at page-dirtying time. the number in brackets shows the rate at which each value is changing, determined from taking the difference between the previous value and the new value, and dividing by the update interval. technical information: this data is collected from / proc/ */ io and is documented further in documentation/ accounting and documentation/ filesystems/ proc. txt in the kernel source.