プロの翻訳者、企業、ウェブページから自由に利用できる翻訳レポジトリまで。
the project aims to ensure that environmental satellite and in situ data and products from participating data providers are transmitted to all users throughout a global network of communication satellites, using a multicast access-controlled broadband capability with associated capacity development.
该项目旨在确保参与的数据提供者的环境卫星和原地数据和产品被通过通信卫星全球网络传送给所有用户,为此使用多点广播访问控制的宽带能力,并发展相关能力。
our deployment technology is based on udp multicast which requires all switches in the network to allow multicast packets. some layer-3 switches may block multicast packets by default. please connect to the switch management console and enable multicast passthrough.
我们的部署技术基于 udp 多播技术,它要求网络中的所有交换机都支持多播数据包。默认情况下,某些第 3 层交换机可能会阻止多播数据包。请连接到交换机管理控制台,并启用多播穿透功能。
offers increased network bandwidth by allowing transmission over 2-8 ports to multiple destination addresses, and also incorporates adapter fault tolerance. only the primary receives incoming traffic. only the primary transmits broadcasts/multicasts and non routed protocols. the ans software load balances transmissions, based on destination address, and can be used with any switch. simultaneous transmission only occurs at multiple addresses implemented in microsoft windows 2000, windows* server 2003, and windows nt 4; netware 4.11 and above; unixware 7.x with ddi8; and linux. this mode can be connected to any switch.
在 2 至 8 个端口上向多个目的地地址传输数据,从而增加网络带宽,同时具有适配器容错功能。只有主要适配器接收入站流量,并且只有主要适配器传输广播/多点传送信息和非路由协议。ans 软件负载根据目的地地址平衡传输数据,可用于任何交换机。只有存在多个地址时,才会同时进行传输。实施范围:microsoft windows* 2000、windows server 2003 和 windows nt* 4;netware* 4.11 及以上版本;配备 ddi8 的 unixware* 7.x 和 linux* (32 bit)。此模式可连接到任何交换机。