전문 번역가, 번역 회사, 웹 페이지 및 자유롭게 사용할 수 있는 번역 저장소 등을 활용합니다.
measurements
mĒrĪjumi
마지막 업데이트: 2017-04-06
사용 빈도: 8
품질:
thickness measurement reports
ziņojumus par biezuma mērījumiem
마지막 업데이트: 2014-11-11
사용 빈도: 1
품질:
thickness measurement reports,
ziņojumi par biezuma mērījumiem,
마지막 업데이트: 2017-04-06
사용 빈도: 4
품질:
the measurements, reports and recording of data shall be carried out according to the procedure set out in annex 2.
mērījumus, protokolu sagatavošanu un datu reģistrāciju veic saskaņā ar 2. pielikumā noteikto kārtību.
마지막 업데이트: 2014-11-17
사용 빈도: 1
품질:
energy e in wh and charging time measurements are recorded in the test report.
testa ziņojumā fiksē enerģiju e (izteiktu wh) un uzlādes laiku.
마지막 업데이트: 2014-11-21
사용 빈도: 2
품질:
the results of the test and the measurement reports shall be attached to the application.
pārbaudes rezultātus un mērījumu ziņojumus pievieno pieteikumam.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
the operator shall adjust all measurements to a dry gas basis and report them consistently.
operators pārrēķina visus mērījumu rezultātus sausai gāzei un attiecīgi ietver ziņojumos.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
the operator shall adjust all measurements to a dry gas basis where required and report them consistently.
ja nepieciešams, operators pārrēķina visus mērījumu rezultātus sausai gāzei un attiecīgi ietver ziņojumos.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
performance measurement, including the provision of investment performance reports and attribution analysis of returns;
rezultātu novērtējums, tostarp ieguldījumu efektivitātes pārskatu sniegšana un atdeves analīze;
마지막 업데이트: 2017-04-06
사용 빈도: 1
품질:
the test report shall include noise-level measurements carried out under the following conditions:
testa ziņojumā jāiekļauj trokšņu līmeņa mērījumi, kas veikti šādos apstākļos:
마지막 업데이트: 2017-04-06
사용 빈도: 5
품질:
measurements shall be recorded according to the “noise measurement report” (annex).
mērījums reģistrē trokšņa mērījumu protokolā (sk. pielikumu).
마지막 업데이트: 2014-11-17
사용 빈도: 1
품질:
the measurement reports must be able to access sufficient detail to allow an analysis to indicate the location and apparent cause of reductions in quality, e.g. delays.
novērtējuma atskaitēm jābūt pietiekami detalizētām, lai analīze varētu norādīt kvalitātes samazinājuma, piemēram, kavējuma, rašanās vietu un acīmredzamo iemeslu.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
the times t1, t2, t3 and t4 required to reach turning speeds r1, r2, r3 and r4 shall be recorded in the measurements report in annex 2.
laiki t1, t2, t3 un t4, kas nepieciešami, lai sasniegtu pagrieziena ātrumus r1, r2, r3 un r4, ir jāreģistrē mērījumu 2. pielikumā pievienotajā mērījumu protokolā.
마지막 업데이트: 2014-11-17
사용 빈도: 1
품질: