검색어: 在新的非 raid 硬盘上安装操作系统。 (중국어(간체자) - 영어)

在新的非 raid 硬盘上安装操作系统。
install the operating system on the new non-raid hard drive.

如何在单个串行 ata 硬盘上安装操作系统（f6 安装方法）
how to install operating system on single serial ata hard drive (f6 install method)

右击设备树内的非 raid 硬盘并选择重建至此硬盘。
right-click on the non-raid hard drive in the device tree and select rebuild to this hard drive.

按 f6 将 raid 驱动程序安装到非 raid 硬盘上。
press f6 to install the raid driver onto the new non-raid hard drive.

当操作系统位于 raid 0 卷上时，硬盘组成盘丢失
missing hard drive member when the operating system is on the raid 0 volume

迁移至 raid 0 或 raid 1 配置不需要重新安装操作系统这样的传统要求。所有应用程序和数据不会受影响。
the migration to a raid 0 or raid 1 configuration is performed without the traditional requirements of an operating system re-install. all applications and data remain intact.

如何安装操作系统至 raid 卷（f6 安装方法）？
how do i install an operating system onto a raid volume (f6 install method)?

当操作系统位于 raid 1 卷或位于非 raid 硬盘上时，硬盘组成盘发生故障
failed hard drive member when the operating system in on the raid 1 volume or on a non-raid hard drive

在安装操作系统和 raid 驱动程序后，打开 windows explorer 识别新硬盘中的新分区和在降级 raid 1 卷中的分区。
after installing the operating system and the raid driver, open windows explorer to identify the new partition existing on the new hard drive and the partition existing on the degraded raid 1 volume.

英特尔® 矩阵存储管理器 - 如何安装操作系统至 raid 卷（f6 安装方法）？
intel® matrix storage manager - how do i install an operating system onto a raid volume (f6 install method)?

当系统处于 raid 模式或 ahci 模式时，若要在单个串行 ata 硬盘驱动器上安装操作系统，则必须采用 f6 安装方法来在操作系统安装过程中加载英特尔® 矩阵存储管理器驱动程序。
in order to install an operating system onto a single serial ata hard drive when the system is in raid mode or ahci mode, the f6 installation method must be used to load the intel® matrix storage manager driver during operating system setup.

操作系统 ：
operating systems: