Tentando aprender a traduzir a partir dos exemplos de tradução humana.
A partir de tradutores profissionais, empresas, páginas da web e repositórios de traduções disponíveis gratuitamente
belastung in der schraubenachse.
loading in the bolt axis.
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
die stöße erfolgen parallel zur schraubenachse.
the impacts are parallel to the bolt.
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
von einer schraubenachse für eine freizeitjacht bis zu einer für ein schlachtschiff der marine
from a shaft for a pleasure yacht to that of a naval battleship
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
die verschraubten teile vibrieren senkrecht zur schraubenachse und die verbindung wird pro zyklus zwei stöße ausgesetzt.
the assembled parts are vibrated vertically and the joints are subjected to two impacts per cycle.
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
während der querbelastung der schraubverbindung zur schraubenachse, wird die vorspannkraft kontinuierlich mit einer druckmessdose erfasst.
during the test, the joint is exposed to transverse movements underneath the bolt head / nut, while the clamping force is continuously measured.
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
der häufigste und natürlichste berührungsfall bei den schraubverbindungen mit normalen schraubenmuttern bei der eingehaltenen rechtwinkligkeit der aufsitzflächen auf die schraubenachse.
the most common and natural case of contacts in bolt connections with normal nuts if the seating surfaces are perpendicular to the axis of the bolt.
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
die kraft wird über den hebelarm (z. b. einen schraubenschlüssel) angelegt und bewegt sich dann um die schraubenachse.
the force is applied at the moment arm (e.g. a wrench) and then rotates around the bolt axis.
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade:
Über die größe der biegespannung entscheidet der wert der winkelabweichung der rechtwinkligkeit der auflagefläche des schraubenkopfes und der schraubenachse [2.8].
the size of bending stress depends on the angle deviation of the seating surface of the bolt head from perpendicularity to the bolt axis [2.8].
Última atualização: 2018-02-13
Frequência de uso: 1
Qualidade: