Você procurou por: use sms command fallback (Inglês - Italiano)

to use sms, you will need an account with a delivery service.
per usare gli sms, è necessario un account con un servizio di consegna.

how do i know when i can work with bluetooth and when i need to use sms?
come faccio a sapere quando posso lavorare tramite bluetooth e quando tramite sms?

all this happens instantly and with a complete and comprehensive sms command list easily available setting up a spy phone has never been this easy – thanks to flexispy.
grazie a flexispy spiare un telefono non è mai stato così facile.

all the sms commands are protected by a configurable 4 digits password.
tutti i comandi via sms sono protetti da password a 4 cifre configurabile.

continuos management of counters that can be acquired and set through sms commands.
gestione continua di contatori che possono essere acquisiti e settati tramite comandi via sms.

if you do not want to control their phone using the internet and your flexispy online account you can control it using sms messages instead. using your own phone simply send an sms command to their phone to configure flexispy to fit your needs.
se non vuoi usare internet e il tuo account online di flexispy per controllare il telefono, puoi farlo via sms. basta inviare un sms dal tuo telefono a quello monitorato per configurare flexispy. tutto questo avviene in modo rapido e semplice, grazie alla lista intuitiva di comandi sms che trovi sul tuo account.

for example, edc will offer basic education lessons via mobile phones to supplement classroom learning as well as offer youth involved in agricultural activities the ability to use sms text messaging to research local and regional market prices.
per esempio, l'edc offrirà lezioni di base tramite telefoni cellulari come integrazione alle lezioni in classe, e insegnerà ai giovani coinvolti nelle attività agricole a utilizzare i messaggi sms per la ricerca dei prezzi di mercato locali e regionali.

all the output lines of gat can be set by using simple sms commands. moreover the notification sms can be received directly by your personal mobile phone.
attraverso dei semplici sms di comando è possibile impostare tutte le linee in uscita del gat. ricevere degli sms di notifica direttamente sul proprio cellulare.

for continuing, press [3] again to monitor for another 30 seconds. [4] key: main unit stops the alarm, intercom the scene for 30 seconds and does not dial the number any more; for continuing, press [3] again to intercom for another 30 seconds. [5] key: open 1 st home appliance. [6] key: close 1 st home appliance. [7] key: open 2nd home appliance. [8] key: close 2nd home appliance. [9] key: open mini siren or wireless siren. if need to close siren, press any one of 1/2/3/4 keys. sms command: 1234 [1-9] # after receiving the alarm by phone, if the user just listens to the voice alarm and hangs up without any remote control, the main unit will continue to dial the next number until somebody answers it. if no body answers, after the main unit dials all the numbers for three times in turn, it will hang up automatically.  remote control dial the number associated to the alarm main unit by phone (mobile phone), and after one ringing cycle, you can hear a voice prompt “please enter the password”; enter the password by phone keys (factory default of remote control password: 1234). if the password is correct, you will hear a prompt “press for ① arm , for ② disarm, for ③ monitor, for ④ intercom ”. the specific operations are shown as below: [1] key: arm, if finished successfully, you will hear a voice prompt “guard has been arranged in the system”. [2] key: disarm, if finished successfully, you will hear a voice prompt “guard has been disabled in this system”. [3] key: monitoring for 30 seconds, to continue monitoring, press [3] again to monitor for another 30 seconds. [4] key: onsite intercom for 30 seconds, to continue intercom, press [4] again to monitor for another 30 seconds. [5] key: open 1 st home appliance. [6] key: close 1 st home appliance. [7] key: open 2nd home appliance. [8] key: close 2nd home appliance. [9] key: open mini siren or wireless siren. if need to close siren, press any one of 1/2/3/4 keys. sms command: 1234 [1-9] # ■ home appliance control home appliance switch pairing ： home appliance switch can only accept the alarm unit signal control after paired. pairing method: refer to household appliance switch manaul, make the appliance into the code-pair state,. then enter into the remote control setting, press 5-8 key operating the alarm unit send out on or off signals to the appliance, paired them is ok. signal encryption ： encrypted wireless signals,can reduce the home appliance mis-operate frequency that caused by other signals interference. encryption method: enter into system setting, input 73 + xx (2-bit encryption of data) + # sms operation: 888873xx # (home appliance control settings have a certain complexity, recommend that users complete purchase directly from the manufacturer). ■ connect wireless siren (option function) this alarm unit can connect wireless siren, to avoid big sound noise to disturb the owner when the siren install near the alarm unit and make a alarm. pair the siren : wireless siren can only accept the alarm unit signal control after paired. pairing method: according to the wireless siren manual, make the siren stay the code-pair state,then continue to press 4 times of set button on the alarm unit, sending "open wireless siren" signal to siren,then to pair them. paired wireless siren, will sound when the alarm unit alarming, and stop to sound when the alarm unit disarm. (due to wireless control, there may be some time delay) signal encryption ： encrypted wireless signals,can reduce the wireless siren mis-alarm frequency that caused by other signals interference. encryption method: enter into system setting, input 74 + xx (2-bit encryption of data) + # sms operation: 888874xx # (wireless siren control settings have a certain complexity, recommend that users complete purchase directly from the manufacturer).  remote control programming dial the number associated to the alarm main unit by phone (mobile phone), and after one ringing cycle, you can hear a voice prompt “please enter the password”; enter the password by phone keys (factory default of remote control password: 8888). if the password are correct, you will hear a long “beep” prompt tone; if it is wrong, you will hear a prompt “the password is invalid, please enter it again”. 9 maintenance system test although the alarm system is used everyday, periodical maintenance and test are required to assure that it can run stably, reliably and safely. usually thorough test must be performed on the alarm main unit every three months. you’d better check the sensor once a month; if not permitted by conditions, you shall check it at least every three months. main unit test: 1. check if it can enable/disable guard normally. 2. check if it can normally dial the number for alarm. 3. check if it can receive the signal from sensors normally or if the backup battery is normal. sensor test: 1. trigger a sensor manually to check if it can sound alarm normally. 2. check the batteries of all the sensors to check if they are under voltage. 3. check the emission of wireless sensors to see if it can communicate with the main unit normally.  trouble shooting if any trouble, perform trouble shooting shown as below: always buzzing: is the sim card fit properly? install again is the pin code of sim card set? cancel it. power indicator always flickering: is the network signal strong enough? change place the signal of unicom card is weaker than that of china mobile. alarm failure: is the code normal or is code pairing finished successfully? confirm the right code and perform code pairing again is the sensor under-voltage and is its transmitting distance not long enough? replace battery dialing failure: is the signal of china mobile strong enough? change place is there enough balance on the gsm card for call? recharge it siren failure: are the positive and negative poles of siren right or in fine contact? check are the defence zone set to mute alarm? reset voice disorder: have you made recording? record again failure in setting by remote control: do you enter the correct setting password (factory default: 8888)? remote control failure: do you enter the correct remote control password (factory default: 1234)  cautions for any consult or maintenance service, please contact our professional engineers or service providers. please do not disassemble, repair and alter the products without permission, or it may cause accidents and faults. do not drop this product on the ground or on hard objects, as it may lead to massive impact to cause faults and damage. without approval and consent of relevant authorities, please do not set “999”, “110” or the alarm phone number of police station for this main unit. 10 standard package  main panel 1pcs  wireless infrared detector 1pcs  wireless magnetic door detector 1pcs  remote control 2pcs  ac/dc adaptor 1pcs  mini siren 1pcs  outside speaker 1pcs  english user manual 1pcsm alarm system
italy