Вы искали: if the battery of my phone is low, i... (Английский - Итальянский)

4. when the battery of your mobile phone is charged:
4. quando il tuo cellulare ha finito di essere caricato:

11. how can i change the battery of my navigator?
19. come posso far riparare il mio navigatore?

since the battery of my cell phone had died, i had to use andregg’s to place the call. fortunately, morrison answered.
fortunatamente, morrison ha risposto a.

missing encoder count in the interface box, this may occur if you move the mount too rapidly or if the battery is low.
conteggio degli spostamenti dell'encoder persi. questo può accadere se muovi la montatura troppo rapidamente o se la batteria è quasi scarica.

if the battery of the phone is charging, you used little or nothing to the wifi provided by the hotel and after breakfast you find yourself spending more than an hour and a half chatting pleasantly without being noticed the passing of time, then you've come to the right place.
se la batteria del telefonino rimane carica, avete utilizzato poco e niente il wifi fornito dalla struttura e dopo la colazione vi ritrovate ad aver trascorso più di un'ora e mezza a chiacchierare piacevolmente senza esservi accorti del tempo che passa, allora siete capitati nel posto giusto.

in fact, many electronic ignition systems won’t function correctly if the battery is low. if a generator is not used on the engine, the generator location is an excellent place to mount a spin-on oil filter.
un dato di fatto ad esempio è che molte accensioni elettroniche non funzionano correttamente se la batteria non è completamente carica. se il generatore non viene usato, al suo posto è possibile montare comodamente un kit filtro dell olio. ci sono altri grossi vantaggi, come ad esempio la possibilità di montare frizioni racing, cambi a 5 o 6 marce o primarie che sono già disponibili per i motori ad alternatore.

the main reason behind this problem is, either the battery of the ipod is low or you have the wrong version of ipod software. if ipod battery is low then you need to recharge the battery of ipod with apple ipod adapter. or else, if you have installed the wrong version of software then you need to update the ipod and if it does not work then you must restore your ipod to get access to ipod data.
il motivo principale alla base di questo problema è, sia la batteria dell'ipod è basso o hai la versione sbagliata del software ipod. se la batteria è scarica ipod allora avete bisogno di ricaricare la batteria di ipod con adattatore ipod apple. oppure, se è stata installata la versione errata di software, allora avete bisogno di aggiornare l'ipod e se non dovesse funzionare, è necessario ripristinare l'ipod per ottenere l'accesso ai dati di ipod.

in fact in the periods in which climatic conditions are unfavourable, if the batteries of accumulation had to remain discharges, the inverter ener save, will effect in automatic way the disposition of the installation to the service of local ngc.
infatti nei periodi in cui le condizioni climatiche sono sfavorevoli, se le batterie di accumulo dovessero permanere scariche, l’inverter ener save, effettuerà in modo automatico la disposizione dell’impianto al servizio enel.

if a big heater or is inserted a powerfull electro pumpa, st-enat 95 don't refuse to feed it, because if the ngc or a generator engine group it is available it sets it in motion and the load transfers him until will be big application of energy; contemporarily it loads the batteries of accumulation of the system with the produced surplus energy, also assuring besides the recharge of the battery for departure of the same generator engine group
se viene inserita una grossa stufa o una potente elettropompa, st-enat 95 non si rifiuta di alimentarla, perché se è disponibile le rete o un gruppo elettrogeno lo pone in moto e gli trasferisce il carico fino a quando ci sarà grossa richiesta di energia; contemporaneamente carica le batterie di accumulo dell’impianto con la potenza eccedente generata assicurando peraltro anche la ricarica della batteria di avviamento dello stesso gruppo elettrogeno.

for continuing, press [3] again to monitor for another 30 seconds. [4] key: main unit stops the alarm, intercom the scene for 30 seconds and does not dial the number any more; for continuing, press [3] again to intercom for another 30 seconds. [5] key: open 1 st home appliance. [6] key: close 1 st home appliance. [7] key: open 2nd home appliance. [8] key: close 2nd home appliance. [9] key: open mini siren or wireless siren. if need to close siren, press any one of 1/2/3/4 keys. sms command: 1234 [1-9] # after receiving the alarm by phone, if the user just listens to the voice alarm and hangs up without any remote control, the main unit will continue to dial the next number until somebody answers it. if no body answers, after the main unit dials all the numbers for three times in turn, it will hang up automatically.  remote control dial the number associated to the alarm main unit by phone (mobile phone), and after one ringing cycle, you can hear a voice prompt “please enter the password”; enter the password by phone keys (factory default of remote control password: 1234). if the password is correct, you will hear a prompt “press for ① arm , for ② disarm, for ③ monitor, for ④ intercom ”. the specific operations are shown as below: [1] key: arm, if finished successfully, you will hear a voice prompt “guard has been arranged in the system”. [2] key: disarm, if finished successfully, you will hear a voice prompt “guard has been disabled in this system”. [3] key: monitoring for 30 seconds, to continue monitoring, press [3] again to monitor for another 30 seconds. [4] key: onsite intercom for 30 seconds, to continue intercom, press [4] again to monitor for another 30 seconds. [5] key: open 1 st home appliance. [6] key: close 1 st home appliance. [7] key: open 2nd home appliance. [8] key: close 2nd home appliance. [9] key: open mini siren or wireless siren. if need to close siren, press any one of 1/2/3/4 keys. sms command: 1234 [1-9] # ■ home appliance control home appliance switch pairing ： home appliance switch can only accept the alarm unit signal control after paired. pairing method: refer to household appliance switch manaul, make the appliance into the code-pair state,. then enter into the remote control setting, press 5-8 key operating the alarm unit send out on or off signals to the appliance, paired them is ok. signal encryption ： encrypted wireless signals,can reduce the home appliance mis-operate frequency that caused by other signals interference. encryption method: enter into system setting, input 73 + xx (2-bit encryption of data) + # sms operation: 888873xx # (home appliance control settings have a certain complexity, recommend that users complete purchase directly from the manufacturer). ■ connect wireless siren (option function) this alarm unit can connect wireless siren, to avoid big sound noise to disturb the owner when the siren install near the alarm unit and make a alarm. pair the siren : wireless siren can only accept the alarm unit signal control after paired. pairing method: according to the wireless siren manual, make the siren stay the code-pair state,then continue to press 4 times of set button on the alarm unit, sending "open wireless siren" signal to siren,then to pair them. paired wireless siren, will sound when the alarm unit alarming, and stop to sound when the alarm unit disarm. (due to wireless control, there may be some time delay) signal encryption ： encrypted wireless signals,can reduce the wireless siren mis-alarm frequency that caused by other signals interference. encryption method: enter into system setting, input 74 + xx (2-bit encryption of data) + # sms operation: 888874xx # (wireless siren control settings have a certain complexity, recommend that users complete purchase directly from the manufacturer).  remote control programming dial the number associated to the alarm main unit by phone (mobile phone), and after one ringing cycle, you can hear a voice prompt “please enter the password”; enter the password by phone keys (factory default of remote control password: 8888). if the password are correct, you will hear a long “beep” prompt tone; if it is wrong, you will hear a prompt “the password is invalid, please enter it again”. 9 maintenance system test although the alarm system is used everyday, periodical maintenance and test are required to assure that it can run stably, reliably and safely. usually thorough test must be performed on the alarm main unit every three months. you’d better check the sensor once a month; if not permitted by conditions, you shall check it at least every three months. main unit test: 1. check if it can enable/disable guard normally. 2. check if it can normally dial the number for alarm. 3. check if it can receive the signal from sensors normally or if the backup battery is normal. sensor test: 1. trigger a sensor manually to check if it can sound alarm normally. 2. check the batteries of all the sensors to check if they are under voltage. 3. check the emission of wireless sensors to see if it can communicate with the main unit normally.  trouble shooting if any trouble, perform trouble shooting shown as below: always buzzing: is the sim card fit properly? install again is the pin code of sim card set? cancel it. power indicator always flickering: is the network signal strong enough? change place the signal of unicom card is weaker than that of china mobile. alarm failure: is the code normal or is code pairing finished successfully? confirm the right code and perform code pairing again is the sensor under-voltage and is its transmitting distance not long enough? replace battery dialing failure: is the signal of china mobile strong enough? change place is there enough balance on the gsm card for call? recharge it siren failure: are the positive and negative poles of siren right or in fine contact? check are the defence zone set to mute alarm? reset voice disorder: have you made recording? record again failure in setting by remote control: do you enter the correct setting password (factory default: 8888)? remote control failure: do you enter the correct remote control password (factory default: 1234)  cautions for any consult or maintenance service, please contact our professional engineers or service providers. please do not disassemble, repair and alter the products without permission, or it may cause accidents and faults. do not drop this product on the ground or on hard objects, as it may lead to massive impact to cause faults and damage. without approval and consent of relevant authorities, please do not set “999”, “110” or the alarm phone number of police station for this main unit. 10 standard package  main panel 1pcs  wireless infrared detector 1pcs  wireless magnetic door detector 1pcs  remote control 2pcs  ac/dc adaptor 1pcs  mini siren 1pcs  outside speaker 1pcs  english user manual 1pcsm alarm system
italy