Вы искали: serieforbindes (Датский - Английский)

et uafhængigt referenceflowmeter med et passende måleområde for sondestrømningen serieforbindes og tilsluttes sonden tæt.
an independent reference flowmeter with a measurement range appropriate for the probe flow shall be put in series with and closely coupled to the probe.

et uafhængigt referenceflowmeter med passende måleområde i forhold til sondeflowet serieforbindes med og tilkobles tæt ved prøvesonden.
an independent reference flowmeter with a measurement range appropriate for the probe flow shall be put in series with and closely coupled to the probe.

en kalibreret masseflowenhed serieforbindes med flowmeteret for qmdew, og nøjagtigheden kontrolleres for den ved prøvningen anvendte værdi.
a calibrated flow device shall be connected in series to the flow-meter for qmdew and the accuracy shall be checked for the value used for the test.

en kalibreret massestrømsanordning skal serieforbindes til flowmeteret for qmdew, og nøjagtigheden skal kontrolleres for de værdier, der anvendes i prøvningen.
a calibrated mass flow device shall be connected in series to the flowmeter for qmdew and the accuracy shall be checked for the value used for the test.

hvis der anvendes bariumhydroxid, serieforbindes der 3 absorptionsflasker med hver 100 ml 0,0125 m bariumhydroxidopløsning til hver 5-liters kolbe.
if barium hydroxide is used, connect three absorption bottles, each containing 100 ml of 0,0125 m barium hydroxide solution, in series to each 5-litre flask.

strømningsanordningen serieforbindes til flowmeteret for qmdw, og nøjagtigheden kontrolleres for mindst 5 indstillinger svarende til et fortyndingsforhold mellem 3 og 50, i forhold til qmdew anvendt under prøvningen.
the calibrated flow device shall be connected in series to the flow meter for qmdw, and the accuracy shall be checked for at least 5 settings corresponding to dilution ratio between 3 and 50, relative to qmdew used during the test.

den kalibrerede strømningsanordning serieforbindes til flowmeteret for qmdw, og nøjagtigheden kontrolleres for mindst 5 indstillinger svarende til et fortyndingsforhold mellem 3 og 50, i forhold til qmdew anvendt under prøvningen.
the calibrated flow device shall be connected in series to the flowmeter for qmdw, and the accuracy shall be checked for at least five settings corresponding to dilution ratio between 3 and 50, relative to qmdew used during the test;

derefter serieforbindes strømningsanordningen til flowmeteret for qmdw, og nøjagtigheden kontrolleres for mindst 5 indstillinger svarende til et fortyndingsforhold mellem 3 og 50, i forhold til qmdew anvendt under prøvningen.
then the calibrated mass flow device shall be connected in series to the flow meter for qmdw, and the accuracy shall be checked for at least 5 settings corresponding to dilution ratio between 3 and 50, relative to qmdew used during the test.

den kalibrerede strømningsanordning serieforbindes til flowmeteret for qmdw, og nøjagtigheden kontrolleres for mindst 5 indstillinger svarende til et fortyndingsforhold mellem 3 og 50, i forhold til qmdew anvendt under prøvningen.
the calibrated flow device shall be connected in series to the flowmeter for qmdw, and the accuracy shall be checked for at least 5 settings corresponding to dilution ratio between 3 and 50, relative to qmdew used during the test.

flowmeteret for qmdw serieforbindes med flowmeteret for qmdew, og differencen mellem de to flowmetere kalibreres for mindst 5 punkter med strømningsværdier ensartet fordelt mellem den laveste qmdw-værdi anvendt under prøvningen og værdien af qmdew anvendt under prøvningen.
the flow-meter for qmdw shall be connected in series to the flow-meter for qmdew, the difference between the two flow-meters shall be calibrated for at least 5 set points with flow values equally spaced between the lowest qmdw value used during the test and the value of qmdew used during the test.

flowmeteret for qmdw skal serieforbindes med flowmeteret for qmdew, forskellen mellem de to flowmetre skal kalibreres for mindst 5 punkter, med strømningsværdier ensartet fordelt mellem den laveste qmdw-værdi anvendt under prøvningen og værdien af qmdew anvendt under prøvningen.
the flowmeter for qmdw shall be connected in series to the flowmeter for qmdew, the difference between the two flowmeters shall be calibrated for at least 5 set points with flow values equally spaced between the lowest qmdw value used during the test and the value of qmdew used during the test.

serieforbindelse
series connection