Вы искали: raid 10 卷降级或故障 (Китайский (упрощенный) - Английский)

raid 10 卷降级或故障
degraded or failed raid 10 volume

raid 10 卷的恢复
raid 10 volume recovery

什么是 raid 10？
what is raid 10?

英特尔® 矩阵存储管理器 - raid 1 卷降级或故障
intel® matrix storage manager - degraded or failed raid 1 volume

4 驱动器 raid 10
2-drive matrix raid

新建 raid 10 卷。
create a new raid 10 volume.

raid 10（仅 s875wp1lx）配置要求
raid 10 (s875wp1lx only) configuration requirements

什么是 raid 10 (raid 0 + raid 1)？
what is raid 10 (raid 0 + raid 1)?

raid 卷降级
degraded raid volumes

“raid 就绪”至 4 驱动器 raid 10
"raid ready" to 4-drive raid 10

4 驱动器 raid 10 至 4 驱动器 raid 5
4-drive raid 10 to 4-drive raid 5

使用 128kb 带区大小从非 raid 迁移至 raid 10 会导致出现蓝屏
migration from non-raid to raid 10 with 128kb strip size results in blue screen

如何从 raid 0、raid 1 或 raid 10 迁移至 raid 5？
how do i migrate from raid 0, raid 1, or raid 10 to raid 5?

注：恢复 raid 10 卷（从故障状态到降级状态）需要至少两个非相邻硬盘组成盘且其状态正常。
note: recovering a raid 10 volume (from the failed state to the degraded state) requires that at least two non-adjacent member hard drives be present and normal.

raid 卷数据验证和修复过程识别并修复 raid 1、raid 5 或 raid 10 卷上的任何不一致或是坏数据。
the raid volume data verification and repair process identifies and repairs any inconsistencies or bad data on a raid 1, raid 5, or raid 10 volume.

如要从 raid 0、raid 1 或 raid 10 迁移到 raid 5，请使用以下步骤：
in order to migrate from raid 0, raid 1, or raid 10 to raid 5, use the following steps:

raid 卷数据验证过程识别 raid 0、raid 1、raid 5 或 raid 10 卷上的任何不一致或是坏数据。
the raid volume data verification process identifies any inconsistencies or bad data on a raid 0, raid 1, raid 5, or raid 10 volume.

在“删除卷菜单”中，使用上下箭头键，选择发生故障的 raid 10 卷。
in the "delete volume menu," use the up and down arrow keys to select the failed raid 10 volume.

raid 10 阵列用四个硬盘通过从 2 个 raid 1 阵列形成一个 raid 0 阵列来创建 raid 0 和 raid 1 组合。
a raid 10 array uses four hard drives to create a combination of raid levels 0 and 1 by forming a raid 0 array from two raid 1 arrays.

该问题不会出现在英特尔矩阵存储管理器版本 pv5.1 中，因为从单个非 raid 串行 ata 硬盘迁移至 raid 10 时不再提供选择 128kb 带区大小的选项。
this issue will not occur in intel matrix storage manager version pv5.1 because the option to select a 128kb strip size is no longer offered when migrating from a single non-raid serial ata hard drive to raid 10.