Вы искали: taline (Словенский - Английский)

z „ekstrakcijo iz taline“.
c. “melt extraction”.

s „predenjem iz taline“ ali
b. “melt spinning”; or

vsebuje breče in taline kamnin.
includes breccias and melt rocks.

s „predenjem iz taline“ in „kominucijo“;
e. “melt spinning” and “comminution”;

z „ekstrakcijo iz taline“ in „kominucijo“ ali
f. “melt extraction” and “comminution”; or

med vzorcem in notranjo steno se zaradi krčenja taline pojavi praznina
a clearance appears between the sample and the inside wall due to shrinkage of the melt

faza b med vzorcem in notranjo steno se zaradi krčenja taline pojavi praznina
stage b a clearance appears between the sample and the inside wall due to shrinkage of the melt.

ostanek taline se raztopi v klorovodikovi kislini (b.2.3) in dolije se voda do prostornine 100 ml.
dissolve the residue from the melt in hydrochloric acid (b.2.3) and make up to 100 ml with water.

z indeksom pretoka taline 22 g/10 min ali več, vendar ne več kot 28 g/10 min,
with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min,

opremo, uporabno za "proizvodnjo" sferičnega aluminijevega prahu s spreminjanjem taline v inertnem mediju (npr. v dušiku).
equipment usable for the "production" of spherical aluminium powders by powdering a melt in an inert medium (e.g. nitrogen).

elektroliza taline soli za proizvodnjo alkalijskih ali zemljoalkalijskih kovin in klora; to je zajeto v referenčnem dokumentu o najboljših razpoložljivih tehnikah za industrijo neželeznih kovin (nfm),
the electrolysis of molten salts for the production of alkali or alkaline earth metals and chlorine; this is covered by the bat reference document on non-ferrous metals industries (nfm);

z raztapljanjem strjene taline sno2/naoh v vodi nastane sol na2[sn(oh)6]2, ki se uporablja v industriji barvil.
its solubility is increased by na2o, k2o and b2o3, and reduced by cao, bao, zno, al2o3, and to a limited extent pbo.

s stopnjo pretoka taline pri 230 °c/2,16 kg 5–15 g/10 min (kot je opredeljeno z metodo astm d1238);
of a melt flow rate (mfr) at 230 °c/2,16 kg of 5-15 g/10 min (as determined by the astm d1238 method),