You searched for: dejected because of a lack of companionship (Engelska - Khmer)

temporarily closed, because of a lack of information
@ info bug report label and value

check this option to assign the network port automatically. this is recommended unless your network setup requires you to use a fixed port, for example because of a firewall.
គូស​ធីក​ជម្រើស​នេះ ដើម្បី​ផ្ដល់​តម្លៃ​ច្រក​បណ្ដាញ​ដោយ​ស្វ័យ​ប្រវត្តិ & # 160; ។ ការ​នេះ​ត្រូវ​បាន​ផ្ដល់​អនុសាសន៍​ លុះ​ត្រា​តែ​ការ​រៀបចំ​បណ្ដាញ​របស់​អ្នក​​ត្រូវការ​ឲ្យ​អ្នក​ប្រើ​ច្រក​ដែល​បាន​ជួសជុល ឧទាហរណ៍ ដោយ​សារ​តែ​ជញ្ជាំង​ភ្លើង & # 160; ។

select the channel mode of the resulting mp3 file: stereo in this mode, the encoder makes no use of potential correlations between the two input channels; it can, however, negotiate the bit demand between both channel, i. e. give one channel more bits if the other contains silence or needs fewer bits because of a lower complexity. joint-stereo in this mode, the encoder will make use of correlations between both channels. the signal will be matrixed into a sum ("mid"), computed by l+r, and difference ("side") signal, computed by l-r, and more bits are allocated to the mid channel. this will effectively increase the bandwidth if the signal does not have too much stereo separation, thus giving a significant gain in encoding quality. mono the input will be encoded as a mono signal. if it was a stereo signal, it will be downsampled to mono. the downmix is calculated as the sum of the left and right channel, attenuated by 6 db.
ជ្រើស​របៀស​ឆានែលសម្រាប់​លទ្ធផល​​ឯកសារ​ mp3 & # 160; ៖ ស្តេរ៉េអូ​ ក្នុង​របៀប​នេះ​, អ៊ិនកូដឌ័រ​មិន​ប្រើសក្តានុពលការ​ជាប់ទាក់ទងរវាង​ឆានែល​ពី​បញ្ចូល​; វា​អាច​, ទោះបី​ជា​, ចរចា​ប៊ីត​ទាមទា​រវាង​ឆានែល​ទាំងពីឆានែល​, ឧទាករណ៍ & # 160; ៖ ផ្តល់​ឆានែល​មួយ​មាន​ប៊ីត​ច្រើន​បើ​ចំណុះ​នៅ​ស្ងៀម​ ឬ ត្រូវ​ការ​ប៊ីត​២ ឬ ៣ ដោយសារ​តែភាព​ស្មុគស្មាញ​មាន​កម្រិត​ទាប​ & # 160; ។ joint- stereo in this mode, the encoder will make use of correlations between both channels. the signal will be matrixed into a sum ("mid"), computed by l+r, and difference ("side") signal, computed by l- r, and more bits are allocated to the mid channel. this will effectively increase the bandwidth if the signal does not have too much stereo separation, thus giving a significant gain in encoding quality. mono the input will be encoded as a mono signal. if it was a stereo signal, it will be downsampled to mono. the downmix is calculated as the sum of the left and right channel, attenuated by 6 db.