Şunu aradınız:: 12v power connector (atx12v) (İngilizce - Çince (Modern))

+12v power connector (atx12v)
+12v 电源连接器 (atx12v)

+12 v power connector (atx12v)fan 3
+12 v 电源连接器 (atx12v)风扇 3

alternate power connector
备用电源连接器

2x2 power connector required
需使用 2x2 电源连接器

2x12 (20-pin) main power connector
2x12（20 针）主电源接口

2x2 or 2x4 power connector required
要求 2x2 或 2x4 电源连接器

atx12v or sfx12v with 2x2 power connector
atx12v 或 sfx12v，带 2x2 电源连接器

2x10 (20-pin) main power connector is now 2x12 (24-pin).
2x10（20 针）主电源连接器现在为 2x12（24 针）

server will not power on - connecting 12v power connector to the server board
服务器未加电 - 将 12v 电源连接器连接到服务器主板

make sure the hard drive power connector and ribbon cable are connected.
尝试重新对驱动器格式化，使其重新具备可启动性。

make sure that the hard drive power connector and ribbon cable are connected.
非系统磁盘或磁盘错误，替换磁盘，准备好后按任意键

power supply atx12v 2.0 or sfx12v 3.0 compliant with 2x2 power connector
与 2x2 电源连接器兼容的 atx12v 2.0 或 sfx12v 3.0

2x10 (20-pin) main power connector is now 2x12 (24-pin) supporting both 2x10 and 2x12 power cables.
2x10 (20 针) 主电源连接器现在为 2x12（24 针），并支持 2x10 和 2x12 电缆。

power supply atx12v 2.0 or sfx12v 3.0 compliant with 2x2 power connector
与 2x2 电源连接器兼容的 atx12v 2.0 或 sfx12v 3.0

chassis and cpu fans may use either 3-pin or 4-pin power connectors.
机箱和 cpu 风扇可使用 3 针或 4 针电源连接器。

the new 4-pin +12v power connector has been added to enable the delivery of more +12vdc current to the desktop board. this connector is used by the board to power the processor's voltage regulator module (vrm).
新的 4 针 +12v 电源连接器可以为台式机主板提供更多的 +12vdc 电流。主板使用该连接器为处理器的电压调节模块 (vrm) 供电。

connect the hard drive, floppy, and dvd (cd-rom) data cables in the normal manner. verify that the cables are installed securely and with the proper edge on pin 1. note: pin 1 will be typically closest to the power connector.
用正常方式连接硬盘、软驱和 dvd (cd-rom)的数据线。 确认电缆得到牢固的安装并且正确的一边安装在针 1 上。请注意： 针 1 通常最靠近电源连接器。

when installing the board in a microatx chassis, make sure that peripheral devices are installed at least 1.5 inches above the main power connector, the diskette drive connector, the ide connector, and the dimm sockets.
在微 atx 机箱中安装主板时，确保外设安装在主电源连接器、磁盘驱动器连接器、ide 连接器和 dimm 插座上方至少 1.5 英寸处。

failure to use the appropriate power supply (below) with intel® desktop board d101ggc and/or not connecting the 12 v (2x2) power connector to the desktop board may result in damage to the board, or the system may not function properly.
英特尔® 台式机主板 d101ggc 未使用合适的电源，且/或未连接 12 v (2x4) 电源连接器至台式机主板，可能导致损坏主板或系统无法正常运行。

an <PROTECTED> power supply supports motherboards that rely on dc/dc conversion from +5 vdc and +3.3vdc. however, an <PROTECTED>12v power supply supports motherboards that rely on dc/dc conversion from +12vdc, +5vdc, or 3.3vdc yielding more application flexibility for future platforms.
<PROTECTED> 电源支持需要进行 +5 v 到 +3.3v 直流转换的主板。然而，<PROTECTED>12v 电源支持需要进行 +12v、 +5v 或 3.3v 直流之间自由转换的主板，以便适用于未来平台上更强的应用灵活性。