Trying to learn how to translate from the human translation examples.
From professional translators, enterprises, web pages and freely available translation repositories.
liitteessä 5 annettujen moottorin dynamometrisäätöjen vääntömomenttiarvot normalisoidaan vastaavan kierrosnopeuden enimmäisvääntömomentiksi.
the torque values in the engine dynamometer schedule of annex 5 are normalized to the maximum torque at the respective speed.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
pisteissä, joiden vääntömomenttiarvot ovat negatiiviset, työn arvon katsotaan olevan nolla.
points with negative torque values have to be accounted for as zero work.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
liitteen iii lisäyksessä 4 annettujen moottorin dynamometrisäätöjen vääntömomenttiarvot normalisoidaan vastaavan kierrosnopeuden enimmäisvääntömomentiksi.
the torque values in the engine dynamometer schedule of annex iii, appendix 4 are normalised to the maximum torque at the respective speed.
Last Update: 2014-11-15
Usage Frequency: 1
Quality:
liitteen 5 kohdassa 1.3 annettujen moottorin dynamometrisäätöjen vääntömomenttiarvot normalisoidaan vastaavan kierrosnopeuden enimmäisvääntömomentiksi.
the torque values in the engine dynamometer schedule of annex 5 paragraph 1.3. are normalized to the maximum torque at the respective speed.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
suurimmat vääntömomenttiarvot vaadituilla testinopeuksilla on määritettävä kokeilemalla, jotta voidaan laskea vääntömomenttiarvot vaadituille testimoodeille.
the maximum torque values at the specified test speeds shall be determined by experimentation in order to calculate the torque values for the specified test modes.
Last Update: 2017-04-06
Usage Frequency: 5
Quality:
ennen syklin työn laskemista poistetaan mahdolliset moottorin käynnistyksen aikana tallennetut nopeus- ja vääntömomenttiarvot.
before calculating the cycle work, any speed and torque values recorded during engine starting shall be omitted.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
käyttöpisteiden (”m”) negatiiviset vääntömomenttiarvot ohittavat viitesyklin luonnin ajaksi normalisoimattomat arvot jollakin seuraavista tavoista:
the negative torque values of the motoring points (‘m’) must take on, for purposes of reference cycle generation, unnormalised values determined in either of the following ways:
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
tästä saatava vääntömomenttikäyrä on kartoituskäyrä, ja sen avulla moottorisyklin normalisoidut vääntömomenttiarvot muunnetaan testisyklin todellisiksi vääntömomenttiarvoiksi, kuten 2 kohdassa kuvataan.
the resulting torque curve is the mapping curve and shall be used to convert the normalised torque values of the engine cycle into actual torque values for the test cycle, as described in section 2.
Last Update: 2017-04-06
Usage Frequency: 3
Quality:
käyttöpisteiden (m tämän liitteen lisäyksessä 1) negatiiviset vääntömomenttiarvot saavat viitesyklin luonnin ajaksi viitearvot jollakin seuraavista tavoista:
the negative torque values of the motoring points (m in appendix 1 to this annex) shall take on, for purposes of reference cycle generation, reference values determined in either of the following ways:
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
tästä saatava vääntömomenttikäyrä on kartoituskäyrä, ja sen avulla moottorisyklin normalisoidut vääntömomenttiarvot muunnetaan testisyklin todellisiksi vääntömomenttiarvoiksi, kuten 2 kohdassa kuvataan.
the resulting torque curve is the mapping curve and must be used to convert the normalised torque values of the engine cycle into actual torque values for the test cycle, as described in paragraph 2.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
lisäyksen 1 (whtc) ja taulukon 1 (whsc) mukaisen moottorin dynamometriajon vääntömomenttiarvot normalisoidaan suurimpaan vääntömomenttiin kullakin kierrosnopeudella.
the torque values in the engine dynamometer schedule of appendix 1 (whtc) and in table 1 (whsc) are normalised to the maximum torque at the respective speed.
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
käyttöpisteiden ("m") negatiiviset vääntömomenttiarvot ohittavat viitesyklin luonnin ajaksi normalisoimattomat arvot jollakin seuraavista tavoista:
the negative torque values of the motoring points ("m") shall take on, for purposes of reference cycle generation, unnormalised values determined in either of the following ways:
tämän liitteen lisäyksen 1 (whtc) ja taulukon 1 (whsc) mukaisen moottorin dynamometriajon vääntömomenttiarvot normalisoidaan suurimpaan vääntömomenttiin kullakin kierrosnopeudella.
the torque values in the engine dynamometer schedule of appendix 1 to this annex (whtc) and in table 1 (whsc) are normalized to the maximum torque at the respective speed.