Sie suchten nach: ohms (Englisch - Maltesisch)

ohms for a 24 volt circuit
ohms għal ċirkuwitu ta’ 24 volt

0,05 ohms for a 6 volt circuit,
0,05 ohms għal ċirkwit ta' 6 volts,

a dc resistance of not more than 0,1 ohms,
b’reżistenza tal-kurrent dirett ta’ mhux iktar minn 0.1 ohms,

0,05 ohms for a nominal voltage of 6 v,
0,05 ohms għal voltaġġ nominali ta' 6 v,

an insulation resistance of more than 100 m ohms, and
reżistenza tal-iżolament ta’ aktar minn 100 m ohm, u

with a surface resistance of between 102-1014 ohms as determined by test method astm d 257,
b’reżistenza tal-wiċċ ta’ bejn 102-1014 ohms kif determinat mill-metodu tat-test astm d 257,

is the resistance in ohms at temperature t, - d r × r is the temperature coefficient.
r hija r-reżistenza f'ohms bit-temperatura t,

if the nominal capacity is not stated, energy density is calculated from the nominal voltage squared then multiplied by the discharge duration in hours divided by the discharge load in ohms and the mass in kilograms.
jekk il-kapaċità nominali ma tkunx definita, id-densità tal-enerġija hija kkalkulata mill-vultaġġ nominali kwadrat u mbagħad immultiplikat bit-tul ta’ ħin tal-iskarika f’sigħat diviż bit-tagħbija tal-iskarika f’ohms u l-massa f’kilogrammi.

film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the astm d 257-99 method)
film tal-poli(etilene tereftalat), poli(etilene naftalat) jew polijester simili miksi fuq naħa b’metalli u/jew ossidi tal-metalli, li fih, f’piż, anqas minn 0,1 % aluminju, bi ħxuna li ma taqbiżx 300 μm u reżistività tal-wiċċ li ma taqbiżx 10000 ohm (kull kwadrat) (skont il-metodu astm d 257-99)