Results for irq translation from Chinese (Simplified) to English

irq
irq

irq 伊拉克
irq iraq

标准 irq 指定：
standard irq assignments are:

修改密码、内存等待时间和 irq
modify passwords, memory latencies, and irqs

irq: 可选下降/上升/高电平/低电平
irq: falling or rising edge or high or low level selectable

com3：irq 4，i/o 03f8
com3: irq 4; i/o 03e8

cedaw/c/irq/2-3
cedaw/c/irq/2-3

伊拉克国家方案文件草稿(dp/dcp/irq/1)；
draft country programme document for iraq (dp/dcp/irq/1);

在 bios 中设置 irq 和 i/o 的步骤：
to set the irq and i/o assignment in bios:

a/hrc/wg.6/20/irq/2
a/hrc/wg.6/20/irq/2

伊拉克国家方案文件草稿(dp/fpa/dcp/irq/1)
draft country programme document for iraq (dp/fpa/dcp/irq/1)

irq：上升沿检测/下降沿检测/高电平检测/低电平检测
irq : rising edge/falling edge/high level/low level detect

任务报告undp/irq/77/006,题为 "教育促进农村发展综合办法试点实验项目 "。
undp/iro/77/006 assignment report on “a pilot experimental project for an integrated approach to education for rural development”.

1998年10月13日(cedaw/c/irq/2-3)
13 october 1998 (cedaw/c/irq/2-3)

部分老型号的串行设备需要设置跳线，以表明 irq 和 i/o 的指定情况。 请参考串行设备附带的文档了解设置跳线的有关信息。
check the pin assignments of the desktop board’s serial connector and make sure the cable from the serial device is connected correctly to the pin-outs.

伊拉克，合并的第二次和第三次定期报告（cedaw/c/irq/2-3）
iraq, combined second and third periodic report (cedaw/c/irq/2-3)

伊拉克的第四、第五和第六次合并定期报告(cedaw/c/irq/4-6)
combined fourth, fifth and sixth periodic reports of iraq (cedaw/c/irq/4-6)

对于 scsi 驱动器，要检查所有 scsi 设备的跳线设置。 确保主硬盘设置为 scsi id 0。在 post 过程中进行检查，看是否加载了 scsi bios 及能否找到 scsi 设备。 如果未找到，检查主机适配器的安装，包括 irq、dma 和 i/o 的设置。
for scsi drives, check the jumper settings of all scsi devices. make sure the primary hard disk is set to scsi id 0. check during post to see if the scsi bios is loading and finding any scsi devices. if not, check the host adapter installation including irq, dma and i/o settings.