From professional translators, enterprises, web pages and freely available translation repositories.
mpe
maximaal toelaatbare fout
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
mpe on measurements
maximaal toelaatbare fout bij de meting van
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
mpe for totalised load
maximaal toelaatbare fout voor de totale last
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
eurofer, apeal and mpe
eurofer, apeal en mpe
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
minimum value of mpe:
minimum waarde van de mpe:
Last Update: 2014-11-21
Usage Frequency: 1
Quality:
each zone has a characteristic mpe.
elke zone heeft een eigen maximaal toelaatbare fout.
Last Update: 2017-04-06
Usage Frequency: 2
Quality:
minimum value of mpe: 0,2s;
minimum waarde van de mpempe: 0,2s;
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
recover to operate within mpe, and
weer over te gaan naar bedrijf binnen de maximaal toelaatbare fout,
Last Update: 2017-04-06
Usage Frequency: 2
Quality:
minimum value of mpe: 4 m;
minimum waarde van de mpempe: 4 m;
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
recover to operate within the mpe limits, and
weer over kan gaan naar bedrijf binnen de maximaal toelaatbare foutgrenzen,
Last Update: 2017-04-06
Usage Frequency: 2
Quality:
mean error category x / mpe category y instruments
gemiddelde fout voor categorie x / maximaal toelaatbare fout voor categorie y
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
the same mpe shall apply to both forward and reverse flow.
voor beide stroomrichtingen geldt dezelfde maximaal toelaatbare fout.
Last Update: 2017-04-06
Usage Frequency: 2
Quality:
for quantities less than two litres the mpe on indications is:
voor hoeveelheden kleiner dan twee liter bedraagt de maximaal toelaatbare fout van de aanwijzing:
Last Update: 2017-04-06
Usage Frequency: 2
Quality:
the relative mpe of the temperature sensor pair, expressed in %:
de relatieve maximaal toelaatbare fout van het temperatuursensorpaar, uitgedrukt in %:
Last Update: 2017-04-06
Usage Frequency: 2
Quality:
the standard deviation of 20 measurements shall not exceed mpe/3.
de standaarddeviatie bij 20 metingen mag niet meer dan mpe/3.
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
the initial mpe is ± 1.0 %, but not less than 1 dm2.
de aanvankelijke mpe bedraagt ± 1,0 %, maar niet minder dan 1 dm2.
Last Update: 2017-04-06
Usage Frequency: 1
Quality:
the quantity corresponding to the mpe on the quantity corresponding to one minute at maximum flowrate.
de hoeveelheid die overeenkomt met de maximaal toelaatbare fout op de hoeveelheid die overeenkomt met één minuut bij het maximale debiet.
Last Update: 2017-04-06
Usage Frequency: 2
Quality: