Results for apa maksud must be at least 6 ... translation from English to Indonesian

error: the password must be at least 5 characters long.
error: password minimal terdiri dari %d karakter.

passwords must be at least 9 characters long, must contain 1 or more special characters (!@
kata sandi harus setidaknya 9 karakter, harus berisi 1 atau lebih karakter khusus (!@

you must be at least 13 years old to use this service
google terjemahan inggris indonesi

screen height must be at least 22 lines for the options menu!
tinggi layar harus berada paling tidak 22 baris untuk menu opsi!

your password should be at least 6 characters long, including at least one alphabetic character and one non-alphabetic character
password anda harus berisi sekurang-kurangnya 6 karakter, setidaknya terdiri atas satu angka dan satu karakter alfabetik

distancing guidelines also include that people stay at least 6 feet (1.8 m) apart.
pedoman pembatasan juga mencakup orang menjaga jarak setidaknya 6 kaki atau 1,8 meter.

4) end tab, if used, shall be removed upon completion and cooling of the weld and the ends of the weld shall be made smooth and flush with the abutting parts. 5) after welding is completed, temporary bolt holes shall be plugged with steel, welded and ground smooth. 6) steel backing, if used, shall be made continuous to the full length of the weld, and need not be removed unless otherwise specified. 7) weld near or around equipment shall only be done with proper grounding to eliminate damage to equipment. such damage includes that to bearing and electronic equipment. 8) copper burn shall be avoided 9) welding machines must be calibrated or verification periodically (min. 6 month below 0°c, the base metal shall be preheated to at least 20°c and be maintained during welding. 6.3.7. welding 6.3.7.1. general 1) arc strikes outside the area of permanent welds shall be avoided on any base metal 2) before welding over previously deposited metal, all slag shall be removed and the weld and adjacent base metal shall be brushed clean 3) end tab shall be used for grove welds in a manner that will ensure sound welds. 4) end tab, if used,
* jika suhu logam dasar di bawah 0 ° c, logam dasar harus dipanaskan terlebih dahulu hingga setidaknya 20 ° c dan dipertahankan selama pengelasan. 6.3.7. pengelasan 6.3.7.1. umum 1) serangan busur di luar area lasan permanen harus dihindari pada logam tidak mulia 2) sebelum pengelasan pada logam yang disimpan sebelumnya, semua terak harus dilepas dan lasan dan logam dasar yang berdekatan harus disikat bersih 3) tab ujung harus digunakan untuk lasan grove dengan cara yang akan memastikan lasan suara. 4) tab akhir, jika digunakan,