Results for only at greeting translation from English to Malay

they do not speak before he has, and they act only at his command.
mereka tidak mendahuluinya dengan perkataan dan mereka pula mengerjakan apa yang diperintahkannya.

the highest risk for men is in their 50s, with the gap between men and women closing only at 90.
risiko tertinggi untuk lelaki ialah mereka dalam umur 50an, dengan jurang antara lelaki dan perempuan merapati hanya pada umur 90 tahun.

may be adequate years to re assess performances of local government with expected progress. this aims not only at assessing themselves internally but also evaluating local governments at national level as a whole in each ams in order to consider supports and assistances by the central government based on the result of evaluations
mungkin tempoh masa yang mencukupi untuk menilai semula prestasi kerajaan tempatan dengan kemajuan yang dijangkakan. ini bertujuan bukan sahaja untuk menilai mereka sendiri secara di peringkat dalaman tetapi juga menilai kerajaan tempatan di peringkat kebangsaan secara keseluruhan di setiap ams untuk mempertimbangkan sokongan dan bantuan oleh kerajaan pusat berdasarkan hasil penilaian

so, here we emphasize on the aspect of learning. i am a person who stays up late to study, this is because i will only be able to feel calm to study only at night where i am someone who is more inclined to study alone.
saya juga bersetuju dimana kita perlulah membuat senarai perkara perkara yang perlu disiapkan. ini akan dapat membantu kita supaya lebih mudah untuk membahagikan masa bagi setiap perkara yan perlu diselesaikan.

adhesive wear adhesive wear occurs when two metals rub together with sufficient force to cause the removal of material from the less wear resistant surface. if the two metals have a comparable chemical analysis and hardness, a galling action can occur where one metal is actually welded to the other causing high and low spots where material is added or removed. the screw and barrel can come into contact with each other during operation. the screw is cantilevered in the barrel and is supported only at its shank and by the plastic in the barrel. when conditions cause excessive contact between the two components, adhesive wear and/or galling will occur on the screw flight od and the barrel wall. there are several causes of adhesive wear and galling, all of which can be prevented through the proper design, manufacture and use of the machinery components.
kejuruteraan mekanik