Results for start button not respon translation from English to Malay

click on the start button
bayangan pada klik kanan

button (not supported by kcontrol)
butang (tidak disokong oleh kcontrol)

1. press the mdi (manual data input) button then press the program button, eob button and insert button. 2. next enter the g30 z0 program then press the eob button, insert button and cycle start button. 3. when appears on the screen z 0.700, can only change the tool point then press the eob button and the insert button. 4. after that, enter the m06 t01 program then press the eob button and start cycle. 5. close the door of the machine when the tool is changed for safety.
1. tekan butang mdi (manual data input) kemudian tekan butang program, butang eob dan butang masukkan. 2. seterusnya masukkan program g30 z0 kemudian tekan butang eob, butang masukkan dan butang mula kitaran. 3. apabila muncul pada skrin z 0.700, hanya boleh menukar mata alat kemudian tekan butang eob dan butang masukkan. 4. selepas itu, masukkan program m06 t01 kemudian tekan butang eob dan mulakan kitaran. 5. tutup pintu mesin apabila alat ditukar untuk keselamatan.