From professional translators, enterprises, web pages and freely available translation repositories.
the high tensile strengths, the exceptional softness and the low modulus of elasticity make it the most 'valuable ally
los puntos fuertes de alta resistencia, la suavidad excepcional y un bajo módulo de elasticidad lo convierten en el "aliado más valioso
modulus of elasticity and water absorption also contribute to the dimensional stability of a material.
el módulo de elasticidad y la absorción de agua también contribuyen a la estabilidad dimensional de un material.
examples of soft glue are polyurethane, rubber, silicone or ms polymer with low modulus of elasticity.
algunos ejemplos de cola blanda son el poliuretano, la goma, la silicona o el polímero ms con un módulo de elasticidad bajo.
the modulus of elasticity of beta titanium is approximately twice that of nitinol and less than one half that of stainless steel.
el módulo de elasticidad del beta titanio es aproximadamente dos veces el del nitinol y menos de la mitad del de acero inoxidable.
of a tensile modulus of 69 mpa or more but not more than 379 mpa (as determined by the astm d 638 method)
con un módulo de tracción (tensile modulus) superior o igual a 69 mpa pero inferior o igual a 379 mpa (según la norma astm d 638)
elinvar is a nickel-steel alloy notable for having a modulus of elasticity which does not change much with temperature changes.
elinvar es una aleación de acero al níquel con un módulo de elasticidad que no cambia mucho con los cambios de temperatura.
tungsten materials also have some advantages, such as high density of 18.6g/cm3, high modulus of elasticity, wearing resistance and good machinability.
materiales de tungsteno también tienen algunas ventajas, tales como alta densidad de 18,6 g / cm3, de alto módulo de elasticidad, resistencia al desgaste y buena maquinabilidad.
the objective is to evaluate the impact of the intensity of thinning on modulus of elasticity (moe) and modulus of rupture (mor).
el objetivo del mismo es evaluar la incidencia de la intensidad del raleo sobre el módulo de elasticidad (moe) y el módulo de rotura (mor).