Results for minum air sejuk translation from Malay to English

minum air
minum air ini

minum air mani
drink semen

aina minum air lemon
ali cut the grass in the yard

saya nak minum air biasa
i want to drink beer water

cikgu saya akan pergi minum air
2. _______________ ke sekolah imas. *

awak perlu minum air mineral banyak-banyak
rest, get well,can start work,maybe you are too tired or stressed

membenarkan penyejuk berubah daripada cecair tekanan rend ah kepada wap tekanan tinggi dan menghasilk an air sejuk
removes heat from refrigerant parts include: .temperature sensors . tubes . pumps . piping

namun, air suam bersabun lebih berkesan daripada air sejuk bersabun untuk menghilangkan minyak semula jadi yang mempunyai tanah dan bakteria.
however, warm, soapy water is more effective than cold, soapy water at removing natural oils which hold soils and bacteria.

dah makan tengah hari ? kalau belum tolong makan ya, kena seimbangkan pemakanan, minum air putih secukupnya. awak tu bekerja, jadi perlukan tenaga yang mencukupi.
have you had lunch? if you have not eaten, yes, you have to balance your diet, drink enough white water. you work, so you need enough energy.

terdapat dua jenis paip air utama: paip panas dan sejuk. paip air panas disambungkan ke bekalan air panas, manakala paip air sejuk disambungkan ke bekalan air sejuk. sesetengah paip boleh digunakan untuk mengeluarkan air panas dan sejuk, dan ini dipanggil paip pengadun.
there are two main types of water taps: hot and cold taps. hot water taps are connected to the hot water supply, while cold water taps are connected to the cold water supply. some taps can be used to dispense both hot and cold water, and these are called mixer taps.

dalam pemprosesan yang sebenar, ianya boleh menyebabkan proses di mana cecair akan menjadi sejuk bagi tujuan penyimpanan. aliran air sejuk yang melalui bahagian pemanasan. pada awalnya suhu luar daripada pemanas akan turun perlahan-lahan tetapi tidak kurang daripada suhu set point (69.0 c)
the feed tank will become empty when water descends the three sections, it should be noted that when the last water enters the tube, the feed tank needs to be filled with cold water to replace the depleted water. this step is important to ensure that no air will be pumped and trapped inside the heat exchanger and will reduce the efficiency of the tool.