Usted buscó: usb device (bootable) (Inglés - Chino (Simplificado))

usb device (bootable)
usb 设备（可启动）

usb device (not bootable)
usb 设备（不可启动）

usb device
usb 设备

creating a bootable usb device
创建可启动 usb 设备

if using a bootable usb device
使用可启动 usb 设备更新

• how to boot from a usb device
• 如何从 usb 设备启动

iflash update with cd-rom or usb device
使用 cd-rom 或 usb 设备的 iflash 更新

intel® /wireless <PROTECTED> lan usb device
英特尔® /无线 <PROTECTED> 局域网 cf 卡

why is my usb device not operating to its specification?
我的 usb 设备的工作性能为何与技术指标不符？

2. boot the target computer with the usb device connected.
2. 使用连接的 usb 设备启动目标计算机。

usb devices
usb 设备comment

4. copy iflash.exe and the .bio file to the bootable usb device.
4. 将 iflash.exe 和 .bio 文件复制到可启动 usb 设备。

1. configure the bios of the target computer to boot to the usb device:
1. 配置目标计算机的 bios 使其从 usb 设备启动：

pilot device %1 does not exist. probably it is a usb device and will appear during a hotsync.
pilot 设备% 1 不存在。 它可能是个 usb 设备， 在同步时出现 。

usb devices attached to this computer
连接到该计算机的 usb 设备name

if you plug in a usb device and it is not detected in windows*, check that all drivers have been properly installed:
如果您插入 usb 设备而 windows* 未检测到，请检查所有驱动程序是否都已正确安装：

make sure you have the latest drivers for the usb device you are using. refer to the manufacturer’s website for the latest drivers.
确保为您使用的 usb 设备安装最新的驱动程序。请访问制造商的网站以获取最新的驱动程序。

plugging usb devices into ps/2 ports
在 ps/2 端口中插入 usb 设备

article about using usb devices with power options.
当中有关使用 usb 设备的电源选项的文章。

if you see messages in windows like “a hi-speed usb device is plugged into a non-hi-speed usb hub” try the following:
如果 windows 中出现如“a hi-speed usb device is plugged into a non-hi-speed usb hub（非高速 usb 集线器中插入了高速 usb 设备）”之类的消息，请尝试以下操作：