Vous avez cherché: procedure of material requisition (Anglais - Malais)

meaning of material
bahan

investigate the nature of material
menyiasat ke atas objek yang boleh tenggelam dan timbul

lack of material materials for teaching
kekurangan bahan mentah

floor finishes to be used consists of material
kemasan lantai yang akan digunakan terdiri daripada bahan

doors and serving hatches are to be finished on both internal and external sides with the same standard of material as the walls.
pintu dan palka hidangan hendaklah disiapkan pada kedua-dua sisi dalaman dan luaran dengan standard bahan yang sama seperti dinding.

investigate the nature of materials
menyiasat alam fizikal

enforce the procedures of security and safety
asue mala y

slide the record disposal procedures of government departments
slide tatacara pelupusan rekod jabatan kerajaan

the cutting process involves the removal of material from a workpiece to produce a specific design. the quality of the cutting process is assessed in terms of the end result of the product and the lifetime of the cutting tool itself.
proses pemotongan melibatkan penyingkiran bahan dari bahan kerja untuk menghasilkan reka bentuk tertentu. kualiti proses pemotongan dinilai dari segi hasil akhir produk dan jangka hayat alat pemotong itu sendiri.

therefore, the selection of materials for making the ship should be made carefully and not carelessly.
oleh yang demikian, pemilihan bahan bahan untuk membuat kapal haruslah dibuat dengan teliti dan tidak cuai.

this product is different from the others because it is made of rattan weave and yarn. the specialty of this product is because this id card holder is made of natural material. products available in the market are usually made of materials such as plastic, fabric, and pvc.
produk ini lain daripada yang lain kerana ia diperbuat daripada anyaman rotan dan mengkuang. keistimewaan produk ini adalah kerana pemegang kad id ini diperbuat daripada bahan semula jadi. produk yang ada dipasaran selalunya diperbuat daripada bahan seperti plastik, kain dab pvc.

my experience, i learned, was revealed by the use of fusion 360 and engineering designs that focused on the type of materials used as appropriate.
pengalaman saya belajar, saya didedahkan dengan penggunaan fusion 360 dan reka bentuk kejuruteraan yang memfokuskan jenis bahan yang digunakan mengikut kesesuaian.

adhesive wear adhesive wear occurs when two metals rub together with sufficient force to cause the removal of material from the less wear resistant surface. if the two metals have a comparable chemical analysis and hardness, a galling action can occur where one metal is actually welded to the other causing high and low spots where material is added or removed. the screw and barrel can come into contact with each other during operation. the screw is cantilevered in the barrel and is supported only at its shank and by the plastic in the barrel. when conditions cause excessive contact between the two components, adhesive wear and/or galling will occur on the screw flight od and the barrel wall. there are several causes of adhesive wear and galling, all of which can be prevented through the proper design, manufacture and use of the machinery components.
kejuruteraan mekanik