Apprendre à traduire à partir d'exemples de traductions humaines.
De: Traduction automatique
Suggérer une meilleure traduction
Qualité :
Réalisées par des traducteurs professionnels, des entreprises, des pages web ou traductions disponibles gratuitement.
alternatively, the feed gas temperature may be measured and converted to catalyst bed temperature using a linear transform calculated from correlation data collected on the catalyst design and ageing bench to be used in the ageing process.
alternatywą jest pomiar temperatury gazu wsadowego i jej konwersja do temperatury złoża katalizatora wykorzystując przekształcenie liniowe obliczane na podstawie korelacji zebranych danych dotyczących konstrukcji katalizatora oraz stanowiska starzenia stosowanego w procesie starzenia.
alternatively, the feed gas temperature just before the catalyst inlet face may be measured and converted to catalyst bed temperature using a linear transform calculated from correlation data collected on the catalyst design and ageing bench to be used in the ageing process.
alternatywą jest pomiar temperatury gazu wsadowego, bezpośrednio przed wlotem katalizatora, i jej konwersja do temperatury złoża katalizatora, wykorzystując przekształcenie liniowe obliczane na podstawie korelacji zebranych danych dotyczących konstrukcji katalizatora oraz stanowiska starzenia stosowanego w procesie starzenia.
in cases where the location with the highest temperature varies over time, or where that location is difficult to define, multiple bed temperatures should be recorded at suitable locations.
w przypadkach gdy miejsce o najwyższej temperaturze zmienia się w czasie, lub jeżeli trudno jest je określić, temperaturę złoża należy rejestrować w wielu odpowiednich miejscach.
with the air injection on, set the ‘rich’ a/f ratio to produce a catalyst bed temperature of 890 °c (± 10 °c).
przy włączonym wtrysku powietrza ustawić stosunek powietrza do paliwa odpowiadający bogatej mieszance, aby wytworzyć w złożu katalizatora temperaturę 890 °c (± 10 °c).
the engine speed, load, and spark timing are selected to achieve a catalyst bed temperature of 800 °c (± 10 °c) at steady-state stoichiometric operation.
należy tak dobrać prędkość obrotową silnika, obciążenie i wartość kąta wyprzedzenia zapłonu, aby osiągnąć w złożu katalizatora temperaturę 800 °c (± 10 °c) podczas działania stechiometrycznego w stanie ustalonym.
in addition to the measures referred to in point 2.4.3.7, nts can also be reduced by increasing the peak temperature of the active regeneration within the modified thermal sequence, without exceeding a bed temperature of 800 °c under any circumstances.
oprócz środków, o których mowa w pkt 2.4.3.7, można również zmniejszyć nts poprzez zwiększenie temperatury szczytowej regeneracji aktywnej w zmodyfikowanej sekwencji termicznej, nie przekraczając jednak w żadnym wypadku temperatury złoża wynoszącej 800 °c.