Réalisées par des traducteurs professionnels, des entreprises, des pages web ou traductions disponibles gratuitement.
Площади, и проверить его на перпендикуляра.
square, at suriin para sa perpendiculars.
Dernière mise à jour : 2018-02-21
Fréquence d'utilisation : 1
Qualité :
Направлением плоскости является направление перпендикуляра к ней (то есть оси ).
the direction of a mirror plane is defined as direction perpendicular to it (the direction of axis).
Dernière mise à jour : 2016-03-03
Fréquence d'utilisation : 1
Qualité :
Расстояние от точки до плоскости — равно длине перпендикуляра, опущенного из точки на плоскость.
the distance from a point to a plane is equal to length of the perpendicular lowered from a point on a plane.
Dernière mise à jour : 2018-02-21
Fréquence d'utilisation : 1
Qualité :
4-2.1.2 На соответствующем расстоянии от носового перпендикуляра должна быть установлена таранная переборка.
4-2.1.2 a collision bulkhead shall be fitted at an appropriate distance from the forward perpendicular.
Dernière mise à jour : 2017-01-03
Fréquence d'utilisation : 4
Qualité :
Определение. Расстояние между плоскостями — равно длине перпендикуляра, опущенного с одной плоскости на другую.
distance from a point to a line — is equal to length of the perpendicular distance from the point to the line.
Dernière mise à jour : 2018-02-21
Fréquence d'utilisation : 1
Qualité :
Расстояние между двумя параллельными плоскостями — равно длине перпендикуляра, опущенного из точки одной плоскости на другую плоскость.
the distance between two planes — is equal to length of the perpendicular distance a one plane to another plane.
Dernière mise à jour : 2018-02-21
Fréquence d'utilisation : 1
Qualité :
iv) Наклон верхушечной розетки: предлагается вместо 60% установить максимальный наклон розетки в 30 градусов от перпендикуляра.
inclination of the crown: we would suggest that the maximum be set at 30 degrees from the perpendicular instead of 60%.
Dernière mise à jour : 2016-12-03
Fréquence d'utilisation : 1
Qualité :
1/ Ось отсчета представляет собой перпендикуляр к плоскости отсчета и проходит через центр диаметра цоколя (45 мм).
1/ the reference axis is perpendicular to the reference plane and passes through the centre of the 45 mm cap diameter.
Dernière mise à jour : 2017-01-03
Fréquence d'utilisation : 8
Qualité :