Da traduttori professionisti, imprese, pagine web e archivi di traduzione disponibili gratuitamente al pubblico.
Aggiungi una traduzione
brudforlængelse
elongation at break
Ultimo aggiornamento 2014-11-15 Frequenza di utilizzo: 10 Qualità: Riferimento: IATE
brudforlængelse i procent
elongation at failure
Ultimo aggiornamento 2014-11-14 Frequenza di utilizzo: 5 Qualità: Riferimento: IATE
med brudforlængelse ikke over 100 %
an elongation at break of not more than 100 %,
Ultimo aggiornamento 2014-11-21 Frequenza di utilizzo: 3 Qualità: Riferimento: IATE
med brudforlængelse 1 % og derover
an elongation at break of 1 % or more, and
a grundmaterialets brudforlængelse (procent)
a elongation value (per cent) of parent material;
Ultimo aggiornamento 2014-11-21 Frequenza di utilizzo: 1 Qualità: Riferimento: IATE
maksimal ændring i brudforlængelse 10 %.
maximum change in elongation at break 10 per cent
Ultimo aggiornamento 2014-11-21 Frequenza di utilizzo: 9 Qualità: Riferimento: IATE
jævnt fordelt forlængelse og brudforlængelse
uniform elongation and breaking elongation
stålets brudforlængelse skal være mindst 14 %.
the elongation for steel shall be at least 14 per cent.
Ultimo aggiornamento 2014-11-21 Frequenza di utilizzo: 2 Qualità: Riferimento: IATE
trækbrudstyrke og brudforlængelse specifikt for termoplastisk materiale.
tensile strength and elongation specific for thermoplastic material.
trækbrudstyrke mindst 10 mpa og brudforlængelse mindst 250 %.
tensile strength not less than 10 mpa and elongation at break not less than 250 per cent.
Ultimo aggiornamento 2014-11-21 Frequenza di utilizzo: 8 Qualità: Riferimento: IATE
maksimal ændring i brudforlængelse –30 % og +10 %.
maximum change in elongation at break –30 per cent and +10 per cent
trækflydespænding og brudforlængelse bestemmes efter afsnit a.22 (tillæg a).
the tensile yield strength and ultimate elongation shall be determined in accordance with paragraph a.22 (appendix a).
brudforlængelsen må ikke være under 100 %.
elongation at break not less than 100 per cent.
Ultimo aggiornamento 2014-11-21 Frequenza di utilizzo: 4 Qualità: Riferimento: IATE