Hai cercato la traduzione di to mm da Francese a Inglese

to
to rest

hauteur (up to 50 cm): +/- 2 mm
height (up to 50 cm): +/- 2 mm

"... shall be equal to 350 ± 20 mm. "
"... shall be equal to 350 ± 20 mm. "

x mm to reference plane x mm du plan de référence
x mm to reference plane

polyester base film: 0.13 mm to 0.23 mm 0.10 mm to 0.23 mm.
polyester base film: 0.13 mm to 0.23 mm 0.10 mm to 0.23 mm

with and pressure to 1, 0 mpa (on yes 50, 80, 100, 200, 300 mm).
with and pressure to 1, 6 mpa (on yes 50, 80, 100 mm).

the test teats were dipped to a depth of 30 mm in sample a or sample b and drained for an additional 10 minutes.
the test teats were dipped to a depth of 30 mm in sample a or sample b and drained for an additional 10 minutes.

le diamètre du tube externe to est de préférence compris entre 20 et 100 mm, et de préférence encore voisin de 43 mm.
the diameter of the outer tube to is preferably between 20 and 100 mm, and more preferably around 43 mm.

thickness is not critical, generally being from about 0.1 to 2 mm thick and of any convenient diameter or other dimensions.
thickness is not critical, generally being from about 0.1 to 2 mm thick and of any convenient diameter or other dimensions.

a place to stand, 1967 ministère du développement économique de l'ontario pellicule cinématographique 35 mm code de référence :
a place to stand, 1967 ontario department of economics and development 35mm colour film reference code:

the teats were dipped to a depth of 15 mm in the challenge suspension of the test organisms, and allowed to drain for 15 minutes for a control, and 5 minutes for the test teats.
the teats were dipped to a depth of 15 mm in the challenge suspension of the test organisms, and allowed to drain for 15 minutes for a control, and 5 minutes for the test teats.

accordingly, an inner reservoir diameter for a marking instrument of the present invention can have a maximum value of more than 2.5 mm, ranging up to 6 mm or more as design considerations dictate.
accordingly, an inner reservoir diameter for a marking instrument of the present invention can have a maximum value of more than 2.5 mm, ranging up to 6 mm or more as design considerations dicate.

seats intended for tractors with a minimum rear wheel track of not more than 1 150 mm may have the following minimum dimensions with respect to the depth and width of the seat surface:
seats intended for tractors with a minimum rear-wheel track of not more than 1 150 mm may have the following minimum dimensions in respect of the depth and width of the seat surface:

(2) for each flight crewmember, the minimum mass flow may not be less than the flow required to maintain, during inspiration, a mean tracheal oxygen partial pressure of 149 mm.
(c) each power, thrust, or supercharger control must give a positive and immediate responsive means of controlling its engine or supercharger.

(aaaa-mm-jj) : 2010/09/24 to 2010/12/03
(yyyy-mm-dd): 2010/09/24 to 2010/12/03