Hai cercato la traduzione di eliminated da Inglese a Bengalese

Traduzione automatica

Imparare a tradurre dagli esempi di traduzione forniti da contributi umani.

English

Bengali

Informazioni

English

eliminated

Bengali

 

Da: Traduzione automatica
Suggerisci una traduzione migliore
Qualità:

Contributi umani

Da traduttori professionisti, imprese, pagine web e archivi di traduzione disponibili gratuitamente al pubblico.

Aggiungi una traduzione

Inglese

Bengalese

Informazioni

Inglese

with travel to the commune restricted, this eliminated new infections completely.

Bengalese

কমিউনে যাতায়াত নিয়ন্ত্রিত করার ফলে নতুন সংক্রমণ পুরোপুরি দূর হয়েছে।

Ultimo aggiornamento 2020-08-25
Frequenza di utilizzo: 1
Qualità:

Inglese

i do not know why no one has objected when poultry were eliminated from three years ago !!

Bengalese

আমি জানি না কেন, তিন বছর আগে যখন মুরগীর খামার ধ্বংস করে ফেলা হয় তখন কেউ কোন আপত্তি জানায়নি!

Ultimo aggiornamento 2016-02-24
Frequenza di utilizzo: 1
Qualità:

Inglese

hcovs that cause severe diseases in humans and humans who developed severe hcov diseases have been eliminated.

Bengalese

যে hcov-সমুহ মানুষের মধ্যে গুরুতর রোগ সৃষ্টি করে এবং যেসব মানুষের গুরুতর hcov রোগের বিকাশ ঘটেছে তাদের নিধন করা হয়েছে।

Ultimo aggiornamento 2020-08-25
Frequenza di utilizzo: 1
Qualità:

Inglese

human rights watch, an international human rights organization, has recommended that the special force be eliminated.

Bengalese

মানবাধিকার বিষয়ক আন্তজার্তিক সংগঠন হিউম্যান রাইটস ওয়াচ র‍্যাবের বিলুপ্তিরও দাবি জানিয়েছে।

Ultimo aggiornamento 2016-02-24
Frequenza di utilizzo: 1
Qualità:

Inglese

the drying effect of alcohol can be reduced or eliminated by adding glycerin and/or other emollients to the formula.

Bengalese

ফর্মূলায় গ্লিসারিন এবং / বা অন্যান্য লোশন যুক্ত করে অ্যালকোহলের শুকয়ে দেওয়ার প্রভাব হ্রাস করা বা দূর করা যায়।

Ultimo aggiornamento 2020-08-25
Frequenza di utilizzo: 1
Qualità:

Inglese

during a world cup match against brazil he missed a goal that bounced off the post, leaving chile eliminated from the tournament.

Bengalese

গোল না দিতে পারায় সে ম্যাচটিতে হেরে চিলি টুর্নামেন্ট থেকে বাদ পরেছিল।

Ultimo aggiornamento 2016-02-24
Frequenza di utilizzo: 1
Qualità:

Inglese

the dissatisfaction seemed to be brought by the disqualification of colombian racer luis mejía, who was eliminated from the race because he accepted one ibuprofen pill between posts.

Bengalese

এই প্রতিযোগিতায় কলম্বিয়ার প্রতিযোগী লুইস মেজ্জা অযোগ্য ঘোষিত হওয়ায় একটা অখুশীর ভাব ছড়িয়ে পড়ে। প্রতিযোগিতার মাঝে একট ইবুপ্রফেন বড়ি খাবার ফলে তাকে প্রতিযোগিতা থেকে বহিষ্কার করা হয়।

Ultimo aggiornamento 2016-02-24
Frequenza di utilizzo: 1
Qualità:

Inglese

he gained fame when he won the heat although he had never raced more than 50m before the preliminaries, and was swimming by himself when the two other swimmers in his heat were eliminated for false starts.

Bengalese

তিনি প্রাক-বাছাইগুলোর আগে কখনো ৫০মিটারের বেশি দূরত্বে প্রতিযোগিতা না করে এবং অন্য দু’জন সাঁতারু ভুলভাবে শুরু করার পর একাকী সাঁতার কেটে খ্যাতি অর্জন করেন।

Ultimo aggiornamento 2016-02-24
Frequenza di utilizzo: 1
Qualità:

Inglese

hong kong, indonesia, lebanon, malaysia, singapore, syria, thailand, vietnam and yemen were eliminated in the last round of qualifiers.

Bengalese

কোয়ালিফাই রাউন্ডের খেলায় হংকং, ইন্দোনেশিয়া, লেবানন, মালয়েশিয়া, সিঙ্গাপুর, সিরিয়া, থাইল্যান্ড, ভিয়েতনাম এবং ইয়েমেন হেরে বিদায় নিয়েছে।

Ultimo aggiornamento 2016-02-24
Frequenza di utilizzo: 1
Qualità:

Inglese

where covid-19 hazards cannot be eliminated, the most effective controls are engineering controls, followed by administrative controls, and lastly personal protective equipment.

Bengalese

যেখানে covid-19 এর ঝুঁকিগুলিকে দূর করা যায় না, সেখানে সবচেয়ে কার্যকর নিয়ন্ত্রণগুলি হল ইঞ্জিনিয়ারিং নিয়ন্ত্রণ, তারপরে প্রশাসনিক নিয়ন্ত্রণ, এবং অবশেষে ব্যক্তিগত সুরক্ষা উপকরণ।

Ultimo aggiornamento 2020-08-25
Frequenza di utilizzo: 1
Qualità:

Inglese

and we conveyed to him [ the decree ] of that matter : that those [ sinners ] would be eliminated by early morning .

Bengalese

আমি লূতকে এ বিষয় পরিজ ্ ঞাত করে দেই যে , সকাল হলেই তাদেরকে সমুলে বিনাশ করে দেয়া হবে ।

Ultimo aggiornamento 2014-07-02
Frequenza di utilizzo: 1
Qualità:

Inglese

sentenceguidelines for welding cast iron cast iron is difficult, but not impossible, to weld. in most cases, welding on cast iron involves repairs to castings, not joining casting to other members. the repairs may be made in the foundry where the castings are produced, or may be made to repair casting defects that are discovered after the part is machined. mis-machined cast iron parts may require repair welding, such as when holes are drilled in the wrong location. frequently, broken cast iron parts are repaired by welding. broken cast iron parts are not unusual, given the brittle nature of most cast iron. while there are a variety of types of cast iron, the most common is gray cast iron, and these guidelines are directed toward this type of material. a few facts about cast iron help in understanding the welding challenges. cast iron typically has a carbon content of 2% - 4%, roughly 10 times as much as most steels. the high carbon content causes the carbon to form flakes of graphite. this graphite gives gray cast iron its characteristic appearance when fractured. when castings are made, molten iron is poured into a mold and allowed to slowly cool. when this high carbon material is allowed to cool slowly, crack free castings can be made. remembering this is helpful when welding cast iron: during and after welding, the casting must either be allowed to cool slowly, or should be kept cool enough that the rate of cooling is not important. a critical temperature in most cast iron is about 1450 degrees f. when at this temperature, conditions that can lead to cracking occur. while the arc will heat the casting to temperatures above this level, it is important that the casting not be held at this temperature for long periods of time. electrode selection if the part is to be machined after welding, a nickel-type electrode will be required. use lincoln softweld® 99ni stick electrode for single pass, high dilution welds. softweld 55 ni is preferred for multiple pass welds. sometimes, root passes are put in with softweld 99 ni, followed by fill passes with softweld 55 ni. for welds where machining is not required, and where the weld is expected to rust like the cast iron, lincoln ferroweld® stick electrode can be used. to heat, or not to heat in general, it is preferred to weld cast iron with preheat--and lots of it. but, another way to successfully weld cast iron is to keep it cool--not cold, but cool. below, both methods will be described. however, once you select a method, stick with it. keep it hot, or keep it cool, but don't change horses in the middle of the stream. welding techniques with preheat preheating the cast iron part before welding will slow the cooling rate of the weld, and the region surround the weld. it is always preferred to heat the entire casting, if possible. typical preheat temperatures are 500-1200 degrees f. don’t heat over 1400 degrees f since that will put the material into the critical temperature range. preheat the part slowly and uniformly. weld using a low current, to minimize admixture, and residual stresses. in some cases, it may be necessary to restrict the welds to small, approximately 1-inch long segments to prevent the build up of residual stresses that can lead to cracking. peening of weld beads can be helpful in this regard as well. after welding, allow the part to slowly cool. wrapping the casting in an insulating blanket, or burying it in dry sand, will help slow cooling rates, and reduce cracking tendencies. welding techniques without pre heat the size of the casting, or other circumstances, may require that the repair be made without preheat. when this is the case, the part needs to be kept cool, but not cold. raising the casting temperature to 100 degrees f is helpful. if the part is on an engine, it may be possible to run it for a few minutes to obtain this temperature. never heat the casting so hot that you cannot place your bare hand on it. make short, approximately 1” long welds. peening after welding is important with this technique. allow the weld and the casting to cool. do not accelerate the rate of cooling with water or compressed air. it may be possible to weld in another area of the casting while the previous weld cools. all craters should be filled. whenever possible, the beads should be deposited in the same direction, and it is preferred that the ends of parallel beads not line up with each other. sealing cracks because of the nature of cast iron, tiny cracks tend to appear next to the weld even when good procedures are followed. if the casting must be water tight, this can be a problem. however, leaking can usually be eliminated with some sort of sealing compound or they may rust shut very soon after being returned to service. the studding method one method used to repair major breaks in large castings is to drill and tap holes over the surfaces that have been beveled to receive the repair weld metal. screw steel studs into the threaded holes, leaving 3/16” (5 mm) to ¼” (6 mm)of the stud above the surface. using the methods discussed above, weld the studs in place and cover the entire surface of the break with weld deposit. once a good weld deposit is made, the two sides of the crack can be welded together.

Bengalese

বাক্য

Ultimo aggiornamento 2016-08-05
Frequenza di utilizzo: 2
Qualità:

Riferimento: Anonimo

Ottieni una traduzione migliore grazie a
7,739,331,040 contributi umani

Ci sono utenti che chiedono aiuto:



I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte nostra. Maggiori informazioni. OK