Imparare a tradurre dagli esempi di traduzione forniti da contributi umani.
Da traduttori professionisti, imprese, pagine web e archivi di traduzione disponibili gratuitamente al pubblico.
clamp of ruin
毁灭之钳
Ultimo aggiornamento 1970-01-01
Frequenza di utilizzo: 1
Qualità:
clamp to ground
贴着地面
Ultimo aggiornamento 2011-10-23
Frequenza di utilizzo: 3
Qualità:
giant-clamp demon
巨钳妖
Ultimo aggiornamento 1970-01-01
Frequenza di utilizzo: 1
Qualità:
clamp(yordle snap trap)
夹子
Ultimo aggiornamento 1970-01-01
Frequenza di utilizzo: 1
Qualità:
gas burner with support and clamp
带支架和夹子的气体燃烧器
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
clamp your hands when closing the door
门夹到手
Ultimo aggiornamento 2020-01-21
Frequenza di utilizzo: 1
Qualità:
Riferimento:
graduated scale, support and clamp gradations in cm
刻度尺、支架和夹子 厘米刻度
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
Riferimento:
they also continue their unprecedented clamp down on chongryon.
它们还继续对朝联总进行前所未有的镇压。
Ultimo aggiornamento 2016-12-03
Frequenza di utilizzo: 1
Qualità:
Riferimento:
use the lathe jaw chuck clamp identification end of the specimen
用车床三爪卡盘夹住试样有标识端
Ultimo aggiornamento 2012-10-16
Frequenza di utilizzo: 2
Qualità:
Riferimento:
the international community must clamp down on tax evasion by multinational companies.
国际社会必须打击多国公司的逃税行为。
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
Riferimento:
clamp the sample with chuck, turn the end face, drill the center hole.
用车床卡盘夹住试样,车端面,打中心孔
Ultimo aggiornamento 2012-10-16
Frequenza di utilizzo: 2
Qualità:
Riferimento:
we are also utilizing sticker type visas in order to clamp down on visa forgery.
我们还使用磁带标记签证,以打击伪造签证行为。
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
Riferimento:
the health club is fastened to the garage with a c-clamp, for cleveland.
健身俱乐部通过一个c形的坡道相连 象征cleveland
Ultimo aggiornamento 2015-10-13
Frequenza di utilizzo: 1
Qualità:
Riferimento:
clamp the workpiece with two thimble at the center hole, fine turn the thread of m16x1-6g
用两顶顶紧工件两中心孔,精刀螺纹m16x1-6g
Ultimo aggiornamento 2012-10-16
Frequenza di utilizzo: 1
Qualità:
Riferimento:
regrettably, the government continued to clamp down on the activities of these organizations during the reporting period.
遗憾的是,在报告阶段该国政府继续镇压这些组织的活动。
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
Riferimento:
clamp the workpiece with two thimble at the center hole.fine turning the thread with size as shown in figure 4.
用两顶尖顶紧工件两中心孔,精车螺纹等,尺寸见图4。
Ultimo aggiornamento 2012-10-16
Frequenza di utilizzo: 1
Qualità:
Riferimento:
border incidents have increased, pointing to efforts on the part of the federal republic of yugoslavia to clamp down on this movement.
边界事件增加说明了南斯拉夫方面遏制越境活动所作的努力。
Ultimo aggiornamento 2016-12-04
Frequenza di utilizzo: 1
Qualità:
Riferimento:
clamp the cylinder of φ16.5, turn the end face of φ16.5 cylinder, the size is shown in figure 3.
夹住φ16.5外圆,车φ16.5外圆端面,尺寸见图3。
Ultimo aggiornamento 2012-10-16
Frequenza di utilizzo: 1
Qualità:
Riferimento:
locate with the two center hole,clamp the workpiece with two thimble, grind the processing chuck to size as shown in figure 6.
用两中心孔定位,用双顶尖顶紧工件,磨削工艺夹头至图6所示尺寸
Ultimo aggiornamento 2012-10-15
Frequenza di utilizzo: 1
Qualità:
Riferimento:
clamp the workpiece with two thimble at the center hole. turn the cylindrical surface of φand the cone of 30°as shown in figure 5.
用两尖顶顶紧工件中心孔,车φ14外圆30°锥面等,见图5。
Ultimo aggiornamento 2012-10-16
Frequenza di utilizzo: 1
Qualità:
Riferimento: