Hai cercato la traduzione di coolflow nozzle da Inglese a Cinese semplificato

flexible nozzle;
a. 活动喷嘴；

movable engine or nozzle;
c. 可移式发动机或发动机喷嘴；

& print a nozzle test pattern
打印喷嘴测试图案( p)

you pump it at a high pressure through a nozzle.
你用高压将它压过一个喷嘴

and after 45 generations, you have this incredible nozzle.
经过45轮测试后 你们就得到了这个很好的喷嘴管口

2 filling detectors with single stretching nozzle and leno ends.
与单拉伸喷嘴和绞边纱线同时使用的两个探纬器。

you take a nozzle and you create 10 random variations on the nozzle.
你拿一个管口 你随机地做出10个不同的管口

and he will, or she will, calculate the optimal design of the nozzle.
他或者她会 计算管口的最佳设计方案

a motor nozzle exit cone extension will increase the vacuum specific impulse of the motor.
一个发动机喷管锥形延伸装置将可增强发动机的真空特别推进力。

in particular, modifications have been made to the nozzle of the first-stage vulcain 2 engine.
特别是对第一级vulcain-2发动机喷管作了修改。

• total length of the engine: ~134 cm (exit nozzle not included)
* 引擎的总长度：～134厘米(不包括出口喷嘴)

efforts began to transition redesigned solid rocket motor nozzle production from utah to the former advanced solid rocket motor site in northeast mississippi.
已开始努力将重新设计的固体火箭发动机喷管生产从犹他州搬迁到密西西比州东北部从前的高级固体火箭发动机生产厂址。

scenario 1: field crop (cotton, tomatoes) sprayed with tractor mounted hydraulic nozzle, low crop
设想方案一：用装在拖拉机上的液压喷嘴对田间低矮作物（棉花、西红柿）进行喷洒

sep has also delivered to pratt and whitney the first carbon-carbon divergent nozzle intended for the rl10 cryogenic engine and the tests in 1997 were highly satisfactory.
sep还为pratt和whitney公司提供了用于rl10号低温发动机的第一个碳－碳扩散型喷管，1997年的测试十分令人满意。

2.4 the workpiece must be clamped before processing., the air nozzle of cleaner should be adjusted according to different processing conditions, it usually orientate the lamp.
2.4 工件必须加紧方可进行加工，吸尘器的风嘴要按不同的加工情况随时调整，一般情况下转向灯头。

typical objects in this category are fasteners, yaw and yo-yo weights, nozzle covers, lens caps, multiple payload mechanisms and so forth.
该类中的典型物体是系固件、方向舵和游游重物、喷管堵盖、透镜罩、多有效载荷机械装置等。

a selection of the ingots would need to be made since unmovic is specifically interested in the melted remnants of the imported turbopumps, of the rejected combustion chamber/nozzle assembly and of the production tools.
对于这些铸模需要进行选择，因为监核视委特别注意的是进口涡轮泵、抛弃的燃烧室/喷嘴组件和生产工具的熔解残余物。

the year 2000 also saw the first functioning in flight of the carbon-carbon extendable nozzle supplied by snecma moteurs and pratt and whitney, which manufactures the delta iii's rl10 launcher.
2000年，snecma moteurs公司和pratt和whitney公司提供的碳－碳可延伸喷管在飞行中第一次投入使用，结果完全令人满意。

the remains of a bevelled metal "nozzle ", measuring 12 millimetres in diameter and punctured by a series of small holes around its circumference, were also found inside the sphere.
该球体内还发现一个锥体金属 "喷嘴 "残余物，直径12毫米，周围分布着一系列小孔。

6.b.2. nozzles
6.b.2. 喷嘴