Hai cercato la traduzione di kegunaan bending da Inglese a Malese

bending
membongkok

kegunaan pejabat
barang untuk pejabat

ins and outs of bending
maksud selok

do warm-ups like bending and stretching
adakah pemanas badan seperti membongkok dan regangan

kegunaan segitiga tanah liat dalmatia sains
kegunaan segitiga tanah liat dalmatia science

memohon pc untuk kegunaan diri sendirifor your own use
memohon pc untuk kegunaan sensiri

pada masa kini social media ialah kegunaan ramai untuk para remaja
pada masa kini ramai remaja rajin bekerja

rotates the original 90 degrees, before bending it along the bend path
putar yang asal 90 darjah, sebelum membengkokkannya sepanjang laluan bengkok

relative position to a reference point defines global bending direction and amount
kedudukan relatif ke titik rujukan takrifkan arah dan amaun pembengkokan sejagat

bending his neck, that he may lead astray from the way of allah; his shall be humiliation in the world, and we shall make him taste on the day of judgment the torment of burning.
ia membantah sambil memalingkan sebelah badannya dengan sombong angkuh sehingga menghalang dirinya dan orang lain dari jalan ugama allah; ia akan beroleh kehinaan di dunia, dan kami akan merasakannya azab yang membakar pada hari kiamat kelak;

a reinforced concrete slab or block which interconnects a group of piles and acts as a medium to transmit the load from wall or column to the piles is called a pile cap. the pile cap should normally be rigid so as to distribute the forces equally on the piles of a group. in general it is designed like a footing on soil but with the difference that instead of uniform reaction from the soil, the reactions in this case are concentrated either point loads or distributed. as per is 2911 (part i/ sec 3) -2010, the pile cap may be designed by assuming that the load from column is dispersed at 45˚ from the top of the cap up to the mid depth of the pile cap from the base of the column or pedestal. the reaction from piles may also be taken to be distributed at 45˚ from the edge of the pile, up to the mid depth of the pile cap. on this basis the maximum bending moment and shear forces should be worked out at critical sections.
tetopi cerucuk