전문 번역가, 번역 회사, 웹 페이지 및 자유롭게 사용할 수 있는 번역 저장소 등을 활용합니다.
kunkin akseliryhmän suurin teknisesti sallittu akselimassa:
technically permissible mass on each group of axles: …
마지막 업데이트: 2017-04-06
사용 빈도: 1
품질:
suurin rekisteröinnissä/käytössä sallittu akseliryhmän massa;
the registration/in-service maximum permissible mass on the group of axles;
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
akseliryhmässä vaimentimien on sijaittava siten, että ne minimoivat akseliryhmän värähtelyn.
on groups of axles, the dampers must be positioned to minimize the oscillation of the groups of axles.
마지막 업데이트: 2014-11-21
사용 빈도: 4
품질:
akseliryhmän osalta valmistajan on ilmoitettava akseliryhmään kohdistuvan kokonaismassan jakautumisesta eri akseleille.
for groups of axles, the manufacturer shall indicate the load distribution among the axles of the total mass applied to the group.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
tämä määritelmä koskee vetävän akselin tai akseliryhmän yläpuolella olevaa jousitettua massaa m (kg).
in this definition a sprung mass m (kg) above a driving axle or group of axles is considered.
마지막 업데이트: 2014-11-21
사용 빈도: 4
품질:
vetävän akselin tai akseliryhmän yläpuolella olevan jousitetun massan vapaan pystysuoran transienttivärähtelyn taajuus saa olla enintään 2,0 hertsiä.
the frequency of the sprung mass above the driving axle or group of axles in a free transient vertical oscillation must not be higher than 2,0 hz.
마지막 업데이트: 2014-11-21
사용 빈도: 4
품질:
μj yksittäisen akselin tai akseliryhmän j suurin teknisesti sallittu akseliryhmämassa, jossa j vaihtelee yhdestä ajoneuvossa olevien yksittäisakselien ja akseliryhmien kokonaismäärään
μj the technically permissible maximum mass on the solo axle or group of axles designated ‘j’, where ‘j’ varies from 1 to the total number of solo axles and groups of axles;
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
ilmajousitusta vastaavaksi tunnustetulla jousituksella tarkoitetaan ajoneuvon akselin tai akseliryhmän jousitusjärjestelmää, joka on 7.11. kohdan vaatimusten mukainen.
'suspension recognized to be equivalent to air suspension` means a suspension system for a vehicle axle or group of axles which complies with the requirements of 7.11.
마지막 업데이트: 2014-11-21
사용 빈도: 4
품질:
jokaisen muun akseliryhmän osalta vähintään yhden akselin on alettava kehittää jarrutuspainetta, kun liitännän paine ≤ 120 kpa.
at least one axle of every other axle group shall commence to develop a braking pressure at the coupling head is at a pressure ≤ 120 kpa.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
akseliryhmän ’j’ suurin teknisesti sallittu akseliryhmämassa, jossa j vaihtelee yhdestä ajoneuvossa olevien yksittäisakselien ja akseliryhmien kokonaislukumäärään,
the technically permissible maximum mass on the solo axle or group of axles designated ’j’, where ’j’ varies from 1 to the total number of solo axles and groups of axles,
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질:
µj = akseliryhmän `j` suurin teknisesti sallittu akseliryhmämassa, jossa j vaihtelee yhdestä ajoneuvossa olevien yksittäisakselien ja akseliryhmien kokonaislukumäärään,
µj = the technically permissible maximum mass on the solo axle or group of axles designated 'j`, where 'j` varies from 1 to the total number of solo axles and groups of axles,
마지막 업데이트: 2014-11-21
사용 빈도: 4
품질:
suurimmalla teknisesti sallitulla akseliryhmän massalla (µ) tarkoitetaan ajoneuvon valmistajan ilmoittamaa suurinta akseliryhmään kohdistuvaa kuormaa vastaavaa massaa, joka perustuu sekä ajoneuvon että akseliryhmän rakenteeseen.
'technically permissible maximum mass on a group of axles (µ)` means the mass corresponding to the maximum permissible static vertical load exerted by the group of axles on the road surface, based on both the construction of the vehicle and of the group of axles and as stated by the vehicle manufacturer.
마지막 업데이트: 2014-11-21
사용 빈도: 4
품질:
’suurimmalla teknisesti sallitulla akseliryhmän massalla (μ)’ ajoneuvon valmistajan ilmoittamaa suurinta akseliryhmään kohdistuvaa kuormaa vastaavaa massaa, joka perustuu sekä ajoneuvon että akseliryhmän rakenteeseen.
‘technically permissible maximum mass on a group of axles (μ)’ means the mass corresponding to the maximum permissible static vertical load exerted by the group of axles on the road surface, based on both the construction of the vehicle and of the group of axles and as stated by the vehicle manufacturer.
마지막 업데이트: 2014-11-21
사용 빈도: 1
품질: