Je was op zoek naar: ipsec (Deens - Engels)

ipsec
ipsec

ipsec- id:
ipsec id

ipsec (racoon)
ipsec (ipsec-tools)

cisco ipsec- id
cisco ipsec id

ipsec (frees/ wan)
ipsec (frees/ wan)

brug global ipsec- hemmelighed
use global ipsec secret

cisco ipsec- id er tom.
cisco ipsec id is empty.

ipsec- gateway forespurgt, sender den...
ipsec gateway address requested, send it...

hvad skal jeg gøre for at få ipsec til at virke?
what i have to do to get ipsec working?

ipsec (linux & 2. 6 indbygget eller bsd)
ipsec (linux & 2.6 native or bsd)

vpn- forbindelse til vpn- servere ved at bruge ipsec
vpn connection to vpn servers by using ipsec

ingen nat- t, ipsec via ip, ingen understøttelse for dns
no nat-t, ipsec over ip, no split dns support

markér for at bruge global ipsec- hemmelighed fra / etc/ vpnc/ default. conf
check to use the global ipsec secret from / etc/ vpnc/ default. conf

tunnelprotokollerne, f.eks. ipsec i tunnelmodus, vil blive anvendt til at overføre krypterede data til bestemmelsesstedet.
the tunnelling protocols, e.g. ipsec in tunnel mode, will be used to transfer encrypted traffic to its destination.

frees/ wan (opens/ wan også) - ipsec vpn linux 2. 4/ 2. 6
frees/ wan (opens/ wan too) - ipsec vpn & linux; 2.4/ 2.6

racoon - (ipsec- tools) & gt; = 1. x ipsec vpn linux 2. 6
racoon - (ipsec-tools) > = 1. x ipsec vpn & linux; 2.6

virtuelle privatnet (vpn) bruger ssl og ipsec til at muliggøre kommunikation via ubeskyttede internetforbindelser og åbne kanaler, idet der opretholdes et givet sikkerhedsniveau.
virtual private networks (vpn) use ssl and ipsec to enable communications to run over insecure internet and open channels while maintaining a given security level.

ssl- og ipsec-protokollerne giver mulighed for at kommunikere via internettet og åbne kanaler med et vist niveau af sikkerhed, men yder ikke en tilstrækkelig garanti.
thanks to ssl and ipsec, it is possible to communicate on the internet and on open channels with some measure of security, but this does not provide sufficient guarantees.

forsøger at forbinde til serveren "% 1" (% 2) med bruger "% 3" og ipsec- identifikation "% 4"...
trying to connect to server "%1" (%2) with user "%3" and ipsec id "%4"...