Je was op zoek naar: motordrift (Deens - Engels)

måleinstrumenter til input og output under motordrift skal opfylde specifikationerne i dette punkt.
measurement instruments for work inputs and outputs during engine operation shall meet the specifications in this paragraph.

eller af de anordninger, der styrer start og stop af motor er i en stilling, hvor motordrift er mulig.
or one of the devices controlling the starting and stopping of the engine is in such a position that operation of the engine is possible.

"periodisk regenerering" en emissionsbegrænsende anordnings regenereringsproces, som foregår periodisk efter mere end 100 timers normal motordrift
"periodic regeneration" means the regeneration process of an emission control device that occurs periodically in less than 100 hours of normal engine operation;

aldringscyklus den maskin- eller motordrift (hastighed, belastning, effekt), der skal udføres under driftsprøveplanen
"ageing cycle" means the machine or engine operation (speed, load, power) to be executed during the service accumulation period;

emissionsrelateret planmæssig vedligeholdelse under motordrift med henblik på at gennemføre en driftsprøveplan skal finde sted med intervaller, der svarer til dem, der er specificeret i fabrikantens vedligeholdelsesvejledning til ejeren af maskinen eller motoren.
emission-related scheduled maintenance during engine running, undertaken for the purpose of conducting a service accumulation schedule, must occur at equivalent intervals to those that shall be specified in the manufacturer's maintenance instructions to the owner of the machine or engine.

"ældningscyklus" den køretøjs- eller motordrift (hastighed, belastning, effekt), som skal udføres under driftsprøveplanen
"ageing cycle" means the vehicle or engine operation (speed, load, power) to be executed during the service accumulation period;

enhver grundlæggende emissionskontrolstrategi, der kan skelne mellem motordrift i en standardiseret typegodkendelsesprøvning og under andre driftsbetingelser og derefter reducere emissionskontrolniveauet, når motoren ikke kører under driftsbetingelser, der i det væsentlige indgår i typegodkendelsesproceduren, er forbudt.
any base emission control strategy that can distinguish engine operation between a standardised type approval test and other operating conditions and subsequently reduce the level of emission control when not operating under conditions substantially included in the type approval procedure is prohibited.

ukølede turbineblade, skovle, bladspidskapper eller andre komponenter, der er beregnet til drift ved gasstrømstotaltemperaturer (stagnationstemperaturer) på 1323 k (1050 °c) eller mere ved statisk start ved havniveau (isa) under ’stationær’ motordrift;
uncooled turbine blades, vanes, tip-shrouds or other components, designed to operate at gas path total (stagnation) temperatures of 1323 k (1050 °c) or more at sea-level static take-off (isa) in a ’steady state mode’ of engine operation;