Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.
standoff height
wysokość palnika - odległość od blachy
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
• torch standoff height
• odległość palnika od przedmiotu obrabianego
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
height
wysokość
Laatste Update: 2019-02-08
Gebruiksfrequentie: 42
Kwaliteit:
Referentie:
height:
dodaj prowadnicÄ...
Laatste Update: 2011-10-23
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
standoff guide
prowadnica dystansowa
Laatste Update: 2013-01-29
Gebruiksfrequentie: 3
Kwaliteit:
Referentie:
50-60a standoff cutting
50-60a ciĘcie bezkontaktowe
Laatste Update: 2013-01-28
Gebruiksfrequentie: 3
Kwaliteit:
Referentie:
standoff cutting with hand torch
cięcie bezkontaktowe palnikiem ręcznym
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
gouging angle and standoff distance
kąt żłobienia i odległość od przedmiotu obrabianego
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
torch standoff too high from workpiece.
odległość palnika od przedmiotu obrabianego jest zbyt duża.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 2
Kwaliteit:
Referentie:
drag cutting, standoff cutting or gouging
cięcie kontaktowe, cięcie bezkontaktowe lub żłobienie
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
standoff may also significantly affect the bevel angle.
odległość palnika od przedmiotu obrabianego może również znacząco wpływać na kąt skosu.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
for a consistent standoff height from the workpiece, install the standoff guide by sliding it onto the torch shield cup.
w celu uzyskania spójnej odległości palnika od przedmiotu obrabianego należy zainstalować prowadnicę dystansową, wsuwając ją do kielicha osłony palnika.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
reducing standoff will generally result in a more square cut.
zmniejszenie tej odległości powoduje na ogół bardziej kwadratowe cięcie.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
smaller standoff distances may result in a severance cut rather than a gouge.
mniejsze odległości od przedmiotu obrabianego mogą spowodować raczej proces cięcia niż żłobienia.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
during operation, position the legs of the standoff guide against the workpiece.
podczas pracy ustawić nóżki prowadnicy dystansowej na przedmiocie obrabianym.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
for standoff tip the recommended standoff is 3/16 inches / 4,7 mm.
zalecana odległość końcówki palnika od blachy wynosi 3/16 cala / 4,7 mm.
Laatste Update: 2013-01-28
Gebruiksfrequentie: 1
Kwaliteit:
Referentie:
air cylinder standoffs
wsporniki siłownika pneumatycznego
Laatste Update: 2012-12-01
Gebruiksfrequentie: 1
Kwaliteit:
Referentie: