Je was op zoek naar: electroconductive (Engels - Russisch)

Computervertaling

Via de voorbeelden van menselijke vertaling trachten te leren vertalen.

English

Russian

Info

English

electroconductive

Russian

 

Van: Machinevertaling
Stel een betere vertaling voor
Kwaliteit:

Menselijke bijdragen

Van professionele vertalers, bedrijven, webpagina's en gratis beschikbare vertaalbronnen.

Voeg een vertaling toe

Engels

Russisch

Info

Engels

*graphene – it is one of the most strong, light and electroconductive way of carbon compound.

Russisch

*Графен - это самый прочный, самый легкий и электропроводящий вариант углеродного соединения.

Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:

Engels

then the water will have absorbed enough impurifications that it will be electroconductive and triggers the sensor. of course, the sensor has to be built it slantwise so that the water runs down again.

Russisch

then the water will have absorbed enough impurifications that it will be electroconductive and triggers the sensor. of course, the sensor has to be built it slantwise so that the water runs down again.

Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:

Engels

the coating acquires a positive charge due to the ejection («offering») of electrons into the iron; thus, it becomes electroconductive and forms a galvanic pair with iron.

Russisch

При этом покрытие приобретает положительный заряд за счет эжекции («жертвования») электронов в железо и, таким образом, является электропроводящим и образует с железом гальваническую пару.

Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:

Engels

the water must be at least slightly contaminated (fractions of dust, smoke, etc.) so that the water is electroconductive and triggers the sensor. in germany the rainwater is conductive in 99% of the areas. if the sensor does not trigger in your case, you should install it in such a manner that the rainwater runs at first over a small porch roof or the like before the water touches the sensor. if the water falls directly from the cloud on the sensor in its purest form and does not trigger it, it will be sufficient if it runs over a small board or from a porch roof on the sensor.

Russisch

the water must be at least slightly contaminated (fractions of dust, smoke, etc.) so that the water is electroconductive and triggers the sensor. in germany the rainwater is conductive in 99% of the areas. if the sensor does not trigger in your case, you should install it in such a manner that the rainwater runs at first over a small porch roof or the like before the water touches the sensor. if the water falls directly from the cloud on the sensor in its purest form and does not trigger it, it will be sufficient if it runs over a small board or from a porch roof on the sensor.

Laatste Update: 2018-02-21
Gebruiksfrequentie: 1
Kwaliteit:

Krijg een betere vertaling met
7,762,969,511 menselijke bijdragen

Gebruikers vragen nu voor assistentie



Wij gebruiken cookies om u de best mogelijke ervaring op onze website te bieden. Door de website verder te gebruiken, geeft u toestemming voor het gebruik van cookies. Klik hier voor meer informatie. OK