Je was op zoek naar: rulesets (Engels - Russisch)

a list of the killbots rulesets installed on this computer.
Список наборов правил для killbots, установленных на этом компьютере.

these properties may be accessed through the rulesets variable.
Доступ к этим свойствам можно получить через переменную rulesets.

- chg: load of rulesets can now be controlled through the advanced acp.
- chg: load of rulesets can now be controlled through the advanced acp.

- chg: openwarfare standard public and match rulesets have been added to the
- chg: openwarfare standard public and match rulesets have been added to the

many role-playing rulesets included solo adventures which were intended to teach the rules systems to the players.
Многие ролевые наборы правил включали сольные приключения, которые были предназначены для обучения игроков ролевым системам.

rulesets form the basis of mods, they contain the values and parameters for every single element in the game, and can be easily tweaked with a text editor.
Наборы правил являются основами модов: они содержат значения и параметры для каждого отдельного элемента игры, и могут быть легко изменены при помощи текстового редактора.

rcr because i think it is the most tactical game of the rulesets i know (mcr, rcr, hongkong and dutch rules).
rcr, так как я думаю, что из всех известных мне правил (mcr, rcr, Гонконгский маджонг и Нидерландские правила) именно эти правила включают в себя больше всего возможностей использовать различные тактики.

################################################################ # # disclaimer/ license # this template is (c) by mario weilguni & lt; mweilguni@kde. orggt; # it is licensed under the same terms as the kppp package, # which it is part of # ################################################################ # # this is a sample rule set for kppp. you can use it as a # template when you have to create your own ruleset. if you do # so, remove all comments and add your own. this will allow # other users to check your ruleset more easily. # # please sign the tarif file with your name and email address # so that i can contact you if necessary. # # note: the rules in this rule set do not make much sense and # are only for demonstration purposes # # note on filenames: # when you create your own ruleset, use "_" in filename # instead of spaces and use ". rst as extension # i. e." austria city calls "# -- > file should be saved as" austria_city_calls. rst "# # thanks, bernd wuebben # wuebben@math. cornell. edu / wuebben@kde. org ################################################################ ################################################################ # # name of the ruleset. this is needed for accounting purposes. # ################################################################ name=default ################################################################ # currency settings ################################################################ # defines ats (austrian schilling) to be used as currency # symbol (not absolutely needed, default =" $") currency_symbol=ats # define the position of the currency symbol. # (not absolutely needed, default is" right ") currency_position=right # define the number of significant digits. # (not absolutely needed, default is" 2 "currency_digits=2 ################################################################ # connection settings ################################################################ # note: rules are applied from top to bottom - the # last matching rule is the one used for the # cost computations. # this is charged whenever you connect. if you do n't have to # pay per-connection, use" 0 "here or comment it out. per_connection=0.0 # minimum costs per per connection. if the costs of a phone # call are less than this value, this value is used instead minimum_costs=0.0 # you pay .74 for the first 180 seconds (3 minutes) no matter # whether you are connected for 1 second or 180 seconds. # this rule will take priority during the first 180 seconds # over any other rule, in particular the'default 'rule. # have a look at costgraphs. gif in the docs directory # of the kppp distribution for a graphic illustration. flat_init_costs=(0.74,180) # this is the default rule which is used when no other rule # applies. the first component" 0.1 "is the price of one #" unit ", while" 72 "is the duration in seconds. # therefore the following rule means:" every 72 seconds 0.1 # ats are added to the bill "default=(0.1, 72) # # more complicated rules: # #" on monday until sunday from 12:00 am until 11:59 pm the costs # are 0.2 each 72 seconds "on () between () use (0.2, 2) # same as above on (monday.. sunday) between () use (0.2, 2) # same as above. you must use 24 hour notation, or the accounting # will not work correctly. (example: write 15:00 for 3 pm) on (monday.. sunday) between (0:00..23:59) use (0.2, 2) # applies on friday, saturday, sunday and monday 8am until 1pm on (friday.. monday) between (8:00..13:00) use(0.3,72) # attention: on(monday.. friday) between (21:00..5:00) use (0.4,2) # does not include saturday 0:00-5:00, just monday.. friday, as it says. # applies on a given date (christmas) on (12/ 25) between () use (0.3,72) # a range of dates and one weekday on (12/ 25..12/ 27, 12/ 31, 07/ 04, monday) between () use (0.4, 72) # use this for easter on (easter) between () use (0.3,72) # easter + 50 days (pfingstmontag/ pentecost monday) on (easter+50) between () use (0.3,72) on (thursday) between (20:00..21:52) use (8.2, 1) # the" on() "rules above all relates to current time only. you can also # make a rule depend on the number of seconds you have been connected # by specifying this time as a third argument to" use() ". # for instance, let's say normal rate in the evening is 0.20 per minute, # and it drops by 20% after one hour of connect time. this can be modelled # like: on () between (19:30..08:00) use (0.20, 60) on () between (19:30..08:00) use (0.16, 60, 3600) # note that these rules, just like other rules, are sensitive to the # order in which they appear.
################################################################ # # disclaimer/ license # this template ist (c) by mario weilguni & lt; mweilguni@ kde. orggt; # it ist licensed under the same terms as the kppp package, # which it is part of # ################################################################ # # this is a sample rule set for kppp. you can use it as a # template when you have to create your own ruleset. if you do # so, remove all comments and add your own. this will allow # other users to check your ruleset more easily. # # please sign the the tarif file with your name an email address # so that i can contact you if necessary. # # note: the rules in this rule set do not make much sense and # are only for demonstration purposes # # note on filenames: # when you create your own ruleset, use "_" in filename # instead of spaces and use ". rst as extension # i. e." austria city calls "# -- > file should be saved as" austria_ city_ calls. rst "# # thanks, bernd wuebben # wuebben@ math. cornell. edu / wuebben@ kde. org ################################################################ ################################################################ # # name of the ruleset. this is needed for accounting purposes. # ################################################################ name=default ################################################################ # currency settings ################################################################ # defines ats (austrian schilling) to be used as currency # symbol (not absolutely needed, default =" $") currency_ symbol=ats # define the position of the currency symbol. # (not absolutely needed, default is" right ") currency_ position=right # define the number of significant digits. # (not absolutely needed, default is" 2 "currency_ digits=2 ################################################################ # connection settings ################################################################ # note: rules are applied from top to bottom - the # last matching rule is the one used for the # cost computations. # this is charged whenever you connect. if you don' t have to # pay per- connection, use" 0 "here or comment it out. per_ connection=0. 0 # minimum costs per per connection. if the costs of a phone # call are less than this value, this value is used instead minimum_ costs=0. 0 # you pay. 74 for the first 180 seconds (3 minutes) no matter # whether you are connected for 1 second or 180 seconds. # this rule will take priority during the first 180 seconds # over any other rule, in particular the 'default' rule. # have a look at costgraphs. gif in the docs directory # of the kppp distribution for a graphic illustration. flat_ init_ costs=( 0. 74, 180) # this is the default rule which is used when no other rule # applies. the first component" 0. 1 "is the price of one #" unit ", while" 72 "is the duration in seconds. # therefore the following rule means:" every 72 seconds 0. 1 # ats are added to the bill "default=( 0. 1, 72) # # more complicated rules: # #" on monday until sunday from 12: 00 am until 11: 59 pm the costs # are 0. 2 each 72 seconds "on () between () use (0. 2, 2) # same as above on (monday.. sunday) between () use (0. 2, 2) # same as above. you must use 24 hour notation, or the accounting # will not work correctly. (example: write 15: 00 for 3 pm) on (monday.. sunday) between (0: 00.. 23: 59) use (0. 2, 2) # applies on friday, saturday, sunday and monday 8am until 1pm on (friday.. monday) between (8: 00.. 13: 00) use( 0. 3, 72) # attention: on( monday.. friday) between (21: 00.. 5: 00) use (0. 4, 2) # does not include saturday 0: 00- 5: 00, just monday.. friday, as it says. # applies on a given date (christmas) on (12/ 25) between () use (0. 3, 72) # a range of dates and one weekday on (12/ 25.. 12/ 27, 12/ 31, 07/ 04, monday) between () use (0. 4, 72) # use this for easter on (easter) between () use (0. 3, 72) # easter + 50 days (pfingstmontag / pentecost monday) on (easter+50) between () use (0. 3, 72) on (thursday) between (20: 00.. 21: 52) use (8. 2, 1) # the" on () "rules above all relates to current time only. you can also # make a rule depend on the number of seconds you have been connected # by specifying this time as a third argument to" use () ". # for instance, let' s say normal rate in the evening is 0. 20 per minute, # and it drops by 20% after one hour of connect time. this can be modelled # like: on () between (19: 30.. 08: 00) use (0. 20, 60) on () between (19: 30.. 08: 00) use (0. 16, 60, 3600) # note that these rules, just like other rules, are sensitive to the # order in which they appear.