Je was op zoek naar: grille (Engels - Sloveens)

grille
rešetka

air-intake grille
rešetka pred hladilnikom

the mesh of the grille shall not exceed 10 mm.
odprtine v mreži pa ne smejo biti večje od 10 mm.

method of determining the distance between parts of a grille
postopek za ugotavljanje razdalje med deli reŠetke

3.method of determining the distance between parts of a grille
postopek za ugotavljanje oddaljenosti med deli reŠetke

method of determining the dimension of a gap or the space between elements of a grille
naČin doloČanja mere reŽe ali prostora med elementi reŠetke

the junction of the front with the side faces of each element forming a grille or gap shall be blunted.
spoj prednje in bočne površine vsakega elementa, ki oblikuje rešetko ali režo, mora biti zaobljen.

glass shall nevertheless be permitted, but in this case the window shall be fitted with a fixed metal grille which cannot be removed from the outside;
steklo je kljub temu dovoljeno, vendar mora biti v tem primeru na oknu nameščena stalna kovinska rešetka, ki je od zunaj ni mogoče odstraniti;

the application refers to an engine compartment encapsulation system which permits the reduction of heat loss after the vehicle is turned off by sealing the engine compartment and by the closing of grille openings by a radiator shutter.
vloga se nanaša na sistem za inkapsulacijo motornega prostora, ki omogoča zmanjšanje toplotnih izgub po izklopu motorja z zatesnitvijo motornega prostora in zaprtjem odprtin v rešetki z žaluzijo hladilnika.

the dimension of a gap or space between elements of a grille shall be determined by the distance between two planes passing through the points of contact of the sphere and perpendicular to the line joining those points of contact.
mera reže ali prostora med sosednjima elementoma rešetke se določi s pomočjo razdalje med dvema ravninama, ki potekata skozi točke dotika krogle in navpično na črto, povezujočo te točke dotika.

‘surface of grille’ means a surface consisting of parallel bars which are spread evenly and have a mutual distance of not exceeding 15 mm.
„površina rešetke“ pomeni površino, ki jo sestavljajo vzporedne palice, ki so enakomerno razporejene in niso več kot 15 mm narazen;

grilles and gaps.
rešetke in reže