Je was op zoek naar: tolok dial (Maleis - Engels)

tolok
gauge

dial
dial

tolok terikan
strain gauge

pad dial
dialpad

gulung tolok aras
level gauge roll

tolok pasang surut
tide gauge

cara mengunakan tolok tinggi vernier
how to use vernier height gauge

lihat pad dial
view the dialpad

--progress=type pilih jenis tolok kemajuan.
--progress=type select progress gauge type.

adapter lalai bluetooth mestilah digiatkan sebelum membuat tetapan sambungan rangkaian dial-up.
the default bluetooth adapter must be enabled before setting up a dial-up-networking connection.

kesimpulannya didapati proses tool set up dan workpiece set up pada 2 jenis machine yang digunakan iaitu haas cnc milling machine dan fanuc cnc milling machine mempunyai perbezaan dari segi control panelnya, menyeset length tool set up di dial gauge dan menyeset jarak workpiece antara jig menggunakan edge finder
in conclusion, it is found that the tool set up and workpiece set up process on the 2 types of machines used, namely haas cnc milling machine and fanuc cnc milling machine have differences in terms of control panel, setting tool set up length on dial gauge and setting workpiece distance between jigs using edge finder

meletakkan pengawal ke dalam perkhidmatan 1. kenal pasti pengawal selia. periksa label dan tolok masuk dan keluar. pastikan tolok tekanan tinggi sesuai untuk tekanan silinder atau sistem sumber. 2.periksa pengawal selia. periksa pengawal selia untuk bukti kerosakan atau pencemaran. jika terdapat bukti kerosakan fizikal atau bahan asing di dalam pengawal selia, hubungi wakil khidmat pelanggan anda untuk maklumat pemulangan. 3.periksa injap silinder. periksa val silinder
putting the regulator into service 1.identify the regulator. check the label and the inlet and outlet gauges. ascertain that the high pressure gauge is suitable for the pressure of the cylinder or source system. 2.inspect the regulator. check the regulator for evidence of damage or contamination. if there isevidence of physical damage or foreign material inside the regulator, contact your customer service representative for return information. 3.inspect the cylinder valve. check the cylinder val