Je was op zoek naar: task in service (Spaans - Engels)

400 are currently in service.
400 are currently in service.

11 in service in 2000, 13 in 2002 and 2005 and 57 in 2008.
11 in service in 2000, 13 in 2002 and 2005 and 57 in 2008.

experience from susning.nu's first nine months in service.
experience from susning.nu's first nine months in service.

100 were in service in 1995, 140 in 2000 and 400 in 2002, 2005 and 2008.
100 were in service in 1995, 140 in 2000 and 400 in 2002, 2005 and 2008.

== armas del renacimiento ==medieval weapons were still in service during the renaissance.
== renaissance weapons ==medieval weapons were still in service during the renaissance & civil war.

admitido a la orden "in service of africa " por el gobierno de la república centroafricana.
admitted to the "in service of africa " order by the government of the central african republic.

13. handbook on methods used by oecd member countries to measure value added in service activities at constant prices
13. handbook on methods used by oecd member countries to measure value added in service activities at constant prices

4. la women in service development organization and management (wisdom), cuyos principales objetivos son:
4. women in service development organization and management (wisdom) the principal objective of the organisation is to:

en el último año, blci ha tenido el apoyo del programa de voluntarios americorps vista (volunteer in service to america).
in the last year, blci has had the support from the americorps vista (volunteer in service to america) program.

acudirán a esta muestra tanto el área de ingeniería y construcción, representada por sener ingeniería y sistemas, como el área de aeronáutica del grupo, representada por itp in service support.
both the engineering and construction area, represented by sener ingeniería y sistemas, and the aeronauticsarea of the group, represented by itp in service support, will take place in the event.

1977-1978 coordinadora de contratación, action-peace corps/volunteer in service to america (vista), nueva york
1977-1978 recruitment coordinator, action-peace corps volunteers in service to america (vista), new york

4 véase en general reparations for injuries suffered in service of the united nations case, advisory opinion of the international court of justice, icj reports, 1949, págs. 174 a 188.
9 see, generally, reparations for injuries suffered in service of the united nations case, advisory opinion of the international court of justice, i.c.j. reports, 1949, pp. 174-188.

around 300 bmp-2 "sarath" were in service in 1995, 1,000 in 2000 and 2002, around 1,000 in 2005 and more than 1,000 in 2008.
around 300 bmp-2 "sarath" were in service in 1995, 1,000 in 2000 and 2002, around 1,000 in 2005 and more than 1,000 in 2008.

** ly-60 — pl-11 adopted for navy ships for air-defense, sold to pakistan but does not appear to be in service with the chinese navy.
** ly-60 — pl-11 adopted for navy ships for air-defense, sold to pakistan but does not appear to be in service with the chinese navy.

st/ai/2003/8 administrative instruction — retention in service beyond the mandatory age of separation and employment of retirees [f i (únicamente)]
st/ai/2003/8 administrative instruction - - retention in service beyond the mandatory age of separation and employment of retirees [e f (only)]

por consiguiente, el programa vnu, en colaboración con la secretaría de las naciones unidas, contribuyó a la actualización del manual de fallecidos en acto de servicio, death in service handbook, publicado por el equipo de preparación y apoyo para emergencias de las naciones unidas y divulgado entre todo el personal de la sede y sobre el terreno.
accordingly, unv, in cooperation with the united nations secretariat, contributed to the development of the updated death in service handbook, which was launched by the united nations emergency preparedness and support team and disseminated to all personnel at headquarters and in the field.

except for nozzles located on the underside of a tank bottom that rests directly on the tank grade29 and nozzles with reinforcements that are too narrow to permit compliance with the following provisions, single-thickness reinforcing plates and saddle flanges or integral reinforcing pads on manholes or nozzles attached to the outside of a tank shall be provided with at least one telltale hole with a maximum actual diameter of 3/8 in. that shall be tapped for a preliminary compressed-air and solution-film test for soundness of attachment welds around the manhole or nozzle and its reinforcement both inside and outside the tank. these telltale holes shall be left open when the tank is in service. the surface of the reinforcing plate, saddle flange, or pad adjacent to the tank wall shall be relieved slightly by grinding to be reasonably certain that the test pressure will extend entirely around the nozzle even though the reinforcement may be drawn tightly against the tank wall by the welding.620
6except for nozzles located on the underside of a tank bottom that rests directly on the tank grade29 and nozzles with reinforcements that are too narrow to permit compliance with the following provisions, single-thickness reinforcing plates and saddle flanges or integral reinforcing pads on manholes or nozzles attached to the outside of a tank shall be provided with at least one telltale hole with a maximum actual diameter of 3/8 in. that shall be tapped for a preliminary compressed-air and solution-film test for soundness of attachment welds around the manhole or nozzle and its reinforcement both inside and outside the tank. these telltale holes shall be left open when the tank is in service. the surface of the reinforcing plate, saddle flange, or pad adjacent to the tank wall shall be relieved slightly by grinding to be reasonably certain that the test pressure will extend entirely around the nozzle even though the reinforcement may be drawn tightly against the tank wall by the welding.20