Você procurou por: simetralo (Esloveno - Inglês)

sestavi simetralo tega kota
construct bisector of this angle

ustvari simetralo te daljice
construct the axis of this segment

izberite daljico, kateri želite narisati simetralo...
select the segment of which you want to draw the axis...

ker pa je notranja simetrala kota, pravokotna na svojo zunanjo simetralo, iz tega sledi, da je središče včrtane krožnice skupaj s tremi središči očrtanega kroga tvorijo ortocentrični sistem.
combining this with formula_36, we have:formula_37.

ena glavnih prečnih pregrad lahko ima vdolbino, če so vsi deli vdolbine med dvema navpičnima ravninama na obeh straneh ladje na razdalji od oplate, ki je enaka petini širine ladje in merjena pravokotno na simetralo ladje na višini najvišje pregradne tovorne črte.
a main transverse bulkhead may be recessed provided that all parts of the recess lie inboard of vertical surfaces on both sides of the ship, situated at a distance from the shell plating equal to one fifth of the breadth of the ship, and measured at right angles to the centreline at the level of the deepest subdivision load line.

antena se postavi zaporedoma na levo in desno stran vozila tako, da je vzporedna z vzdolžno simetralo vozila in v višini središča motorja (glej sliko 2 v dodatku 1 k tej prilogi).
the antenna shall be located successively on the left and right-hand sides of the vehicle, with the antenna parallel to the plane of longitudinal symmetry of the vehicle and in line with the engine mid-point (see figure 1 in appendix 1 to this annex).

0,5 ± 0,05 m na obeh straneh referenčne točke na črti skozi referenčno točko in na isti višini, kakor je referenčna točka, ter pravokotno na vzdolžno simetralo vozila;
0,5 ± 0,05 m either side of the reference point on a line passing through the reference point and at the same height as the reference point, and perpendicular to the vehicle plane of longitudinal symmetry;

takšna vrata so postavljena na čim večji višini in čim večji oddaljenosti od zunanje oplate, kolikor je to praktično izvedljivo, vendar njihovi zunanji navpični robovi niso od zunanje oplate v nobenem primeru oddaljeni manj kakor petino širine ladje, pri čemer se ta oddaljenost meri pravokotno na vzdolžno simetralo ladje na višini pregradne tovorne črte.
they shall be fitted at the highest level and as far from the shell plating as practicable, but in no case shall the outboard vertical edges be situated at a distance from the shell plating which is less than one fifth of the breadth of the ship, such distance being measured at right angles to the centreline at the level of the deepest subdivision load line.