Вы искали: modulus (Английский - Китайский (упрощенный))

modulus:
系数:

bulk modulus
体积模量

elastic modulus
弹性模量

young's modulus:
杨氏系数 ：

production of high modulus polyethylene fibre
生产高模数聚乙烯纤维

usa production of high modulus polyethylene fibre
生产高模数聚乙烯纤维

production of high modulus polyethylene fibre cfc-113
生产分子聚乙烯纤维

get the modulus of the left_operand using modulus.
get the modulus of the left_operand using modulus.

lower modulus of elasticity, which reduces brittle failure;
Ø 弹性较低，减少了脆性破坏；

1. a "specific modulus " exceeding 10 x 106 m; or
1. "比模量 "大于10x106米；

cfc-113 is used as a process agent in the production of high modulus polyethylene fibre. this use was the subject of a careful panel review in 2005.
生产高模聚乙烯纤维时1,1,2-三氯-1,2,2-三氟乙烷被用作加工剂，2005年评估小组对这一用途进行了详细审查。

(e) cfc 113 in the production of high modulus polyethylene (use 14 in table a of decision x/14)
(e) 生产高模聚乙烯时使用1,1,2-三氯-1,2,2-三氟乙烷（第x/14号决定表a用途14）

silicone elastomers and gels can be formulated with low modulus, giving them excellent stress relief capabilities.silicone elastomers and gels can be formulated with low modulus, giving them excellent stress relief capabilities.
有机硅 弹性体 和 凝胶体 可以低模数配制， 因此拥有出色的应力释放能力有机硅 弹性体 和 凝胶体 可以低模数配制， 因此拥有出色的应力释放能力

58. carbon fibre has many properties that make it ideal for use in gas centrifuges: it is stronger and lighter than aluminium, corrosion resistant and especially high in tensile strength and modulus, or stiffness.
58. 碳纤维具有许多特性，使其成为用于气体离心机的理想选择：它比铝更结实而且更轻，耐腐蚀，尤其是在抗拉强度和弹性模量或刚度方面很高。

the material inspected by the panel has a tensile strength of 4,900 mpa, and modulus of 230 gpa, which clearly falls above the control thresholds cited in resolution 1929 (2010).
专家小组检查的材料抗拉强度为4 900兆帕，弹性模量为230千兆帕，这显然达到了第1929(2010)号决议所提到的管制门槛值。

sensitivities of microparameters with respect to uniaxial compressive strength (ucs),young’s modulus, and poisson’s ratio (i.e. macroscopic responses of model) were tested by the plackett–burman (pb) design method.
通过plackett-burman（pb）设计方法测试了相对于单轴抗压强度（ucs）微参数的敏感性，杨氏模量和泊松比（即模型的宏观反应）。