You searched for: vrtina (Slovenska - Engelska)

vrtina
borehole

vrtina:..mm
bore:... mm

delujoča vrtina,
active well

vrtina r:mm
bore (r):. mm

vrtina (borehole)
borehole (borehole)

vrtina(l): …… mm
bore (l): …… mm

delujoča vrtina (activewell)
active well (activewell)

vodnjak, vrtina ali izvir
well, borehole or spring

vrtina, gib in prostornina valjev
bore, stroke and capacity of cylinders

vrtina je zgrajena na mestu, ki se prej ni uporabljalo.
borehole constructed on a site not previously used.

vrtina je splošni izraz za kakršen koli ozek izvrtan jašek v tleh.
a borehole is the generalized term for any narrow shaft drilled in the ground.

10. če se vrtina zgradi, spremeni ali vzdržuje z neproizvodno napravo, naslednje dodatne informacije:
where a well is to be constructed, modified or maintained by means of a non-production installation, additional information as follows:

vrtina, pogosto opuščena naftna ali plinska vrtina, v katero se lahko za varno odlaganje injicirajo odpadne vode.
a well, often a depleted oil or gas well, into which waste fluids can be injected for safe disposal.

vrtina v podpovršje z odstranitvijo prsti/kamenja npr. z votlim cevnim orodjem, da se izvede opis profila, vzorčenje in/ali ugotavljanje lastnosti tal na terenu.
penetration into the sub-surface with removal of soil/rock material by using, for instance, a hollow tube-shaped tool, in order to carry out profile descriptions, sampling and/or field tests.

bistvene značilnosti osnovnega motorja v družini motorjev (3)2.1 opis motorja na kompresijski vžig2.1.1 proizvajalec:2.1.2 proizvajalčeva koda motorja, kot je označena na motorju:2.1.3 delovni postopek: štiritaktni/dvotaktni (1)2.1.4 vrtina: mm2.1.5 gib: mm2.1.6 Število in razporeditev valjev:2.1.7 delovna prostornina: cm3
essential characteristics of the family’s parent engine (3)2.1. description of the compression-ignition engine2.1.1. manufacturer:2.1.2. manufacturer’s engine code as affixed to engines:2.1.3. cycle: four stroke/two stroke (1)2.1.4. bore: mm2.1.5. stroke: mm2.1.6. number and layout of cylinders:2.1.7. swept volume: cm3