İnsan çevirisi örneklerinden çeviri yapmayı öğrenmeye çalışıyor.
Profesyonel çevirmenler, işletmeler, web sayfaları ve erişimin serbest olduğu çeviri havuzlarından.
以φ14工艺夹头与中心孔定位,先粗磨至尺寸留余量0.1mm,再进行精磨,尺寸按图8所示,磨削方向沿试样轴向。
located with the φ14 processing chuck and center hole, first,rough grinding to a size of 0.1mm margin, then fine grinding, the size is shown in figure 8, the grinding direction along the sample axia.
Son Güncelleme: 2012-10-16
Kullanım Sıklığı: 2
Kalite:
然而,这个问题最好是在今后再进行讨论。
however, this question could usefully be revisited in the future.
Son Güncelleme: 2016-12-04
Kullanım Sıklığı: 4
Kalite: